dji Inspire 1 V1.2 Quide di avvio rapido - Pagina 8
Sfoglia online o scarica il pdf Quide di avvio rapido per Droni dji Inspire 1 V1.2. dji Inspire 1 V1.2 10.
Stampa la pagina
7. Mounting the Gimbal and Camera
Remove the Gimbal Cover.
1
Rotate the Gimbal Lock to the unlocked position (to the right when
facing the nose of the aircraft). Insert the gimbal by aligning the
white mark on the gimbal with white mark on the Gimbal Lock.
Rotate the gimbal lock back into the locked position (to the left
when facing the nose of the aircraft).
1
Gimbal Cover
8. Preparing for Flight
Place the aircraft on a flat surface, in an open space, with the back facing you.
Move the Flight Mode Switch to the right to select P mode. ( P mode is Positioning mode, A mode
1
is ATTI mode, and the F mode is Function mode. )
Power on the remote controller.
Power on the aircraft and wait for the self-check to complete. Do not move the aircraft during the
self-check.
Ensure the remote controller is linked to the aircraft before flight. Re-link the remote controller to the
aircraft if it fails to connect. Refer to the INSPIRE 1 User Manual on how to link.
Ensure the remote controller and your mobile device are connected with a USB cable. Launch the
5
DJI Pilot app when connecting to the aircraft for the first time, and follow the instructions within the app.
Launch the DJI Pilot app and tap "Camera". Ensure the aircraft is functioning normally by
6
completing the Checklist.Beginner Mode is enabled by default when you launch the DJI Pilot app
for the first time. The aircraft's altitude and flight distance is restricted when flying in Beginner Mode.
We recommend you fly in Beginner Mode when using the aircraft for the first time. You may disable
Beginner Mode in the settings page of the DJI Pilot app.
Calibrate the compass by tapping the Aircraft Status Bar in the app and selecting "Calibrate". Then
7
follow the on-screen instructions.
For 1345s Propeller, install the propellers with a white dot onto the mounting plates that have a white dot,
8
and install the propellers without a white dot onto the mounting plates that do not have a white dot. Press
the propeller down onto the mounting plate and rotate in the lock direction until secure.
For 1345 Propeller, attach propellers with the black nut onto motors with the black dot and spin
counter-clockwise to secure. Attach propellers with gray nut onto motors without a black dot and spin
clockwise to secure. Place all propellers onto the correct motor and tighten by hand to ensure security
before flight.
When not in P mode, the Inspire 1 will only maintain altitude, not position, and will drift with
●
wind or user inputs. Return to Home is not available in F mode.
9. Remote Controller Operation
The remote controller is by default set to Mode 2 ( throttle controlled by the left-hand stick ).
Adjust the tilt angle of camera by using the Gimbal Dial.
Left Stick
You can set the remote controller to different modes using the DJI Pilot app.
●
3
Gimbal Lock
Mounting Place
Gimbal Connector
2
Right Stick
Locked
1
3
5
DJI Pilot
App
7
8
Gimbal Dial
2
4
6