AIMS Power PWRNV1250W Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Inverter AIMS Power PWRNV1250W. AIMS Power PWRNV1250W 9. Dc to ac power inverter

current is in the yellow zone. Operation in the red zone of the display will result in

protective inverter shutdown. NOTE: The bar display will only monitor DC current

and voltage not AC. If you need to measure AC output you will need to use a

RMS MULTI METER.

Remote On/Off Switch

Some models include a remote port. An AIMS remote on/off switch may be

connected to the remote port. The optional remote on/off switch is a convenient

option to turn the inverter on/off if the inverter is installed in a hard to reach area.

Make sure the inverter is turned off before installing the remote switch. Simply plug

the switch into the remote jack. There are several ways to mount the remote switch.

Remote switch comes with 4 pre-drilled holes for mounting. Remote part #

REMOTEHF.

The output waveform of the inverter is a MODIFIED SINE WAVE. If you choose to

measure the AC output voltage, you must use a TRUE RMS MULTI METER. Using any

other type of voltage measuring device will result in an AC voltage reading of 10 to

30 volts lower than actual voltage. When using a true RMS multi meter, you will get

an accurate reading.

•

Do not open the case of the inverter. The high voltage inside the unit is the same type of

power as your electrical outlets at home.

•

Do not let the cord of the inverter, or any appliance cord get wet. If you are operating the

inverter in a moving vehicle, we recommend that you secure the inverter to prevent it from

shifting around while the vehicle is moving.

•

Do not operate this inverter in or around water. Water can damage the inverter, and water

damage is not covered under warranty. Also, do not operate the inverter with wet hands. The

AC voltage of the unit makes it an electrical shock hazard if operated with wet hands.

TRUE