Arthur Grillo PFT25 Istruzioni per l'uso e l'installazione - Pagina 5

Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Trasmettitore Arthur Grillo PFT25. Arthur Grillo PFT25 16.

Product description

Our PFT are combined measuring transducers for the measurement of rel. humidity and

temperature.

Special features of the individual devices:

PFT22

- Two analog outputs:

1. Temperature with four switchables measuring ranges

2. relative humidity.

PFT25

- Two analog outputs:

1. Temperature -30...+50 °C

2. relative humidity, dew point temperature, enthalpy;

Special version: Absolute humidity

PFT28

- Display

- Selectable analog output: 0/2...10 V or 0/4...20 mA

- Two analog outputs:

1. Temperature -30...+50 °C

2. relative humidity, dew point temperature, enthalpy;

Special version: Absolute humidity

For the application areas of sewer / pipe systems, indoor area or in the outdoor and wet

area, we provide various special designed housings.

Our PFT22 and PFT25 are both designed as two-wire technology with two output signals

of 4...20 mA or as three-wire technology with two outputs of 0...10 V. The supply voltage

of the two-wire technology is 15...30 Vdc, in three-wire technology it is 24 Vdc or 24 Vac.

As PFT28 it is supplied with 15...30 Vdc or 24 Vac, with a jumper the output signals can be

switched from 0/2...10 V to 0/4...20 mA.

The combined transducers of the PFT series are used for measuring / signal transmission

of relative humidity and temperature in the application area of heating and air-conditioning.

Our PFT devices are equipped with a single-chip sensor for an optimal measurement of

relative humidity and temperature. Depending on the application the sensor chip is located

in a stainless steel probe tube or is housed directly in an ABS plastic housing. The signi-

ficant parts of sensors are: Two sensor units (capacitive measuring principle for relative

humidity and semiconductor principle for temperature), a signal amplification, a 14-bit

A / D converter and a digital two-wire interface. Furthermore, there is a OTP memory

located on this chip, which stores the calibration data of both capturing principles. The

signal transmission from sensor to evaluation electronics takes place digitally. The sensor

Doc.-no.: PFT_01_EN

PRODUCT DESCRIPTION

Issue: 05/2017