dji MR1SS5 Faq - Pagina 9

Sfoglia online o scarica il pdf Faq per Droni dji MR1SS5. dji MR1SS5 15.

Use the included screwdriver to change the propellers. Please follow the instructions

provided. Remove the two blades and screws on the same motor, and replace with

the propellers in the same package with new screws. Attach the propellers with marks

to the motors with marks, and the unmarked propellers to unmarked motors. Ensure

that the propellers and motors are installed securely before each flight.

What do I need to know before installing the 360° Propeller Guard?

a. After attaching the 360° Propeller Guard, the service ceiling is reduced to 1500 m

as there are some weight-related safety concerns when flying with this accessory at

high altitudes.

b. To ensure flight safety, after attaching the 360° Propeller Guard, the maximum

speed is limited to 8 m/s, the flight altitude is limited to 120 meters, and the flight

distance is limited to 100 meters. Make sure to always fly carefully and within line of

sight.

c. After attaching the 360° Propeller Guard, takeoff and hover and the aircraft will

enter Payload mode within six seconds and notify the user. If the system does not

detect the accessory, you can enable Payload mode manually in the DJI Fly app.

d. After attaching the 360° Propeller Guard, the aircraft will weigh more than 250

grams. This means that in some countries and regions, you may need to obtain a

related license when flying with this accessory attached. Always be aware of and

comply with local laws and regulations before flying.

What is the maximum wind resistance level of Mavic Mini?

Mavic Mini can hover stably at in wind speeds of up to 8 m/s.

What is Mavic Mini's maximum service ceiling?