ARTHUR HOLM AH22D X216GA Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Monitor ARTHUR HOLM AH22D X216GA. ARTHUR HOLM AH22D X216GA 14. Hdcp compliant retractable monitors for furniture integration

Stampa la pagina

SYSTEM DESCRIPTION

Applications

The DynamicX2 system is a professional TFT display with an elegant

housing and an electrical lift system for installation into an horizontal

furniture surface.

On the starting position (retracted), the screen is placed inside the

table leaving the desk free of any obtrusive elements. When in this

position, the power will automatically be disconnected in order to save

energy and preserve panel life. By pressing the rear button located on

the table cover plate, the TFT panel raises up into the working position

(raised and tilted). The TFT power is then restored.

This TFT-LCD product range is specially designed for desk integration at:

∙ Conference rooms

∙ Meeting rooms

∙ Auditoriums

∙ Information desks

Features

• TFT Active Matrix display

AH15D X2HDGA

FULL HD 15.6"

AH17D X2HDGA

FULL HD 17.3"

AH19D X2HDGA

FULL HD 18.5"

AH22D X216GA

FULL HD 21.5"

• Retractable monitor with electrical engine for furniture integration and

tilting screen 20° (factory adjusted).

• Up/Down function operated by two buttons on the cover plate.

• Up/Down external contact close (GPI) or RS-422 control.

• Low power consumption.

• Low radiation.

• Quick response time.

• Data inputs DVI-I and DVI-D. HDCP compliant.

• Upper cover plate in brushed stainless steel. Monitor housing made of

solid mechanised aluminium in anodised finish and front glass.

∙ Board rooms

∙ Training rooms

SYSTEM DESCRIPTION

• Electrical powered lift system with variable speed.

• Addressable RS422 monitor control by AHnet protocol, RJ45

connector CAT5.

Box Contents

Before the installation of your retractable monitor, please check the

contents of the shipping box, it must contain the following items:

• Monitor

• Power cord

• Power supply 100-240Vac, 50-60Hz. Output 12V

• Remote control (1 per 5 monitors)

• User Manual

Important note: This device can only work with the power supply

included in the shipping box. This power supply can not be replaced by

any other rather than the original one.

Connections

Before connecting the power:

1. Open the hatch and remove the two foam protection pieces before

connecting the monitor.

2. Install the unit on a table or desk, in vertical position.

Power connection:

1. Plug the power cable from the power supply into an AC socket of

100-240 Vac, 50-60Hz.

2. Plug the 12Vdc cable into the socket on the unit.

Signal connection:

1. Use the DVI-I input to connect a DVI-D signal or an analog RGB

signal (VGA).

2. Plug the DVI-D connector to a DVI-D signal.

Caution! Never use this monitor in horizontal position.