EDIFIER X2s Manuale

Sfoglia online o scarica il pdf Manuale per Cuffie senza fili EDIFIER X2s. EDIFIER X2s 7. True wireless earbuds headphones

Stampa la pagina

Tru e Wi rel es s Earbuds Head ph o nes

EN 1. Power ON/OFF

White LED lit for 1s

1. Power ON when taken out of the case.

2. Power OFF when placed in the case.

Note:

If there is no Bluetooth connection for 10 minutes after powered on,

the earbuds will power off automatically.

2. Pairing

Indicator

1st Pairing

1. Taken out of the case. White and blue LEDs will blink alternately.

2. Select "EDIFIER X2s" in your Bluetooth device setting to connect.

White LED will blink twice in 5 seconds when successfully.

Note:

For subsequent use, the earbuds will automatically connect to the

device used last time.

3. Reset

Indicator

1. Taken out of the case.

2. Disconnected from any Bluetooth device. Press and hold the touch

panel on either earbud for around 8s until blue LED blinks 6 times

to clear the Bluetooth pairing records and power off. If the left and

right earbuds are connected, the other side will clear the

Bluetooth pairing record and power off too.

3. Placed back in the case and taken out of the case again.

4. Select "EDIFIER X2s" in your Bluetooth device setting to connect.

White LED will blink twice in 5 seconds when successfully.

4. Left & Right connection

Indicator

1. When earbuds are powered on and there is no Bluetooth connection

and TWS connection, respectively tap the touch panel 5 times on

both earbuds until white LED blinks slowly to enter TWS pairing

mode. Once the left and right earbuds are connected successfully,

white and blue LEDs will blink alternately to enter Bluetooth

pairing mode.

2. Select "EDIFIER X2s" in your Bluetooth device setting to connect.

White LED will blink twice in 5 seconds when successfully.

5. Charging

Indicator

6. Controls

Left Touch Panel

Note:

1. Images are for illustrative purposes only and may differ from the

actual product.

2. Download Edifier Connect App for more customizable control

settings.

For more information, please visit our website:

@Edifierglobal

Model: EDF200123

Edifier International Limited

P.O. Box 6264

General Post Office

Hong Kong

www.edifier.com

Printed in China

NOTICE:

For the need of technical improvement and system upgrade,

information contained herein may be subject to change from time

to time without prior notice.

Products of EDIFIER will be customized for different applications.

Pictures and illustrations shown on this manual may be slightly

different from actual product. If any difference is found, the actual

product prevails.

X 2 s

Manual

Earbuds

1. When hearing a low battery prompt tone, please

place the earbuds in the case for charging.

2. White LED on earbud is steady lit when charging

and off when fully charged.

Charging Case

1. Please connect the case to power source with

the included Type-C charging cable for charging.

2. White LED is steady lit when charging and off

when fully charged.

Note:

Please do not charge the earbuds when there is

sweat or other liquids inside the charging port,

which may damage the earbuds.

Input: 5V

200mA(Earbuds)

1A(Charging case)

www.edifier.com

@Edifier_Global

Indicator

Right Touch Panel

@Edifier_Global