dji FOCUS CP.ZM.000238.02 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Telecomando dji FOCUS CP.ZM.000238.02. dji FOCUS CP.ZM.000238.02 12.

Only use official DJI batteries that can be purchased on www.dji.com. DJI takes no

responsibility for any damage to your devices caused by non-DJI batteries.

Never use swollen, leaky, or damaged batteries. If your batteries show any abnormal

signs in performance, contact DJI or a DJI authorized dealer for assistance.

Never disassemble or pierce the battery in any way, or else the battery may leak, catch

fire, or explode.

DO NOT attach the batteries to wall outlets or car charger sockets directly, and always

use a DJI approved adapter. DJI takes no responsibility if the battery is charged using

a third party charger.

Attaching the Neck Strap

Pull down and hold the button on the neck strap connector, slide it through the mounting hole on

the bottom of the remote controller, and then release the button.

Connection

To allow communication between the two devices, connect the communication port on the

Focus remote controller to the CAN Bus port on the Inspire 1 remote controller using the

dedicated CAN Bus cable.

Ensure that the Zenmuse X5 camera lens is set to AF mode.

In the DJI GO app, ensure the shooting mode is set to 'M' (manual) or 'A' (aperture

priority).