dji RM500-ENT Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Telecomando dji RM500-ENT. dji RM500-ENT 15.

4. Adjusting the Antennas

Lift the antennas and adjust them. The strength of the Smart

Controller signal is affected by the position of the antennas.

When the angle between the antennas and the back of the Smart

Controller is 80° or 180°, the connection between the Smart

Controller and aircraft can reach its optimal performance.

Optimal Transmission Zone

Try to keep the aircraft inside the optimal transmission zone. If the signal is weak, adjust the

antennas or fly the aircraft closer.

Avoid using wireless devices that use the same frequency bands as the Smart Controller.

In real operation, the DJI Pilot app will issue a prompt to warn that the transmission signal is weak, and

please adjust the antennas to ensure that the aircraft is back to the optimal transmission range.

5. Linking the Smart Controller and Aircraft

When the Smart Controller is purchased together with an aircraft as a combo, it is already linked

to the aircraft. If not, please follow the steps below to link the Smart Controller and the aircraft

after successful activation.

1. Turn on the Smart Controller and the aircraft.

2. Press down the customizable buttons C1, C2, and the record button simultaneously. The

status LED will blink blue and the Smart Controller will sound a double beep to indicate that

linking starts.

3. Press and hold the aircraft's power button for at least five seconds to link the aircraft and the

Smart Controller. The Smart Controller's status LED will be solid green if linking is successful.

Please refer to the user manual for more details about linking the Smart Controller to the aircraft. To

download the manual, please visit https://www.dji.com/matrice-300.

6. Flight

Before taking off, make sure the Aircraft Status Bar

in the DJI Pilot app displays "Ready to Go (GPS)" or

"Ready to Go (RTK)".

80°

Ready to Go (GPS)