Artidor SpotLED AR-040 Series Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Riflettore Artidor SpotLED AR-040 Series. Artidor SpotLED AR-040 Series 6. Explosion-safe spotled



Install the connection cable and make sure that it is protected from mechanical and chemical influences.



Connect the end of the cable in a proper way to an external connection box and ensure this is done

professionally. The connection box is not supplied. Use a connection box that it is suitably protected for the

(explosion hazard) classification of the surroundings in which it will be used.



The connection cable has three cores for the following connections:

Green / yellow:

Blue:

Brown:

Maintenance

For the maintenance of the SpotLED the requirements as stated in EN 60079-17 apply.

If the SpotLED and the connection cable are no longer in good condition or are very dirty or damaged they must be

repaired or cleaned immediately.

The power supply to the SpotLED must be switched off and may only be restored after the maintenance has been

carried out and approved.

The advised maintenance cycles for the SpotLED depends on the specific use and must therefore be agreed upon with

the user for the expected use.

10.

Repair

Except for the transparent lens and the bracket, none of the parts of the SpotLED can be repaired or replaced. If

repairs are carried out in an incompetent manner, the explosion-safety of the SpotLED can no longer be guaranteed.

Therefore it is preferred that the SpotLED is returned to the manufacturer for repair.

11.

Removal / re-use

The equipment can be completely processed as electronic waste. For processing regarding disposal or reuse of the

product and its packaging, national disposal and environmental laws and legislation must be taken into consideration.

Manual explosion-safe SpotLED AR-040

Issue April 2020

Earth or equipotential bonding

Neutral (-)

Positive (+)

Green / Yellow

Blue

Brown

5 / 6