Artidor AR-030 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature industriali Artidor AR-030. Artidor AR-030 6. Explosion-safe door magnet

Stampa la pagina

Mounting:

Holding force:

Supply voltage:

Power:

Sealed against moisture and dust:

Position:

Activation time:

Electrical connections:

Weight:

Marking and warning on the equipment

The marking label as shown below will be attached to the AR-030 Door Magnet.

II 3 G Ex ec IIC T6 Gc, II 3 D Ex tc IIIC T80°C Dc

Cert. ARTIDOR 20ATEX9999

TF & Serial No.: AS123456

WARNING

ARTIDOR Explosion Safety B.V.

Emopad 38, 5663 PB Geldrop, The Netherlands, www.artidor.com

Installation instructions



Installation of explosion-safe equipment such as this product must be carried out by personnel specially trained

and qualified to do this, following the relevant requirements of the installation standard EN 60079-14.



For the installation and use of this product the relevant safety regulations and also the generally recognized latest

state of the technology apply.



During assembly, care must be taken that the framework, screws and surface are strong enough to take the

weight and the holding force of the door magnet.



Isolate power from the electrical supply cable prior to installation.



The door magnet is double isolated and therefore an earth connection is not necessary.



Install the connection cable and make sure that it is protected from mechanical and chemical influences.



Connect the end of the cable in a proper way to an external connection box and ensure this is done

professionally. The connection box is not supplied. Use a connection box that it is suitably protected for the

(explosion hazard) classification of the surroundings in which it will be used.



The connection cable has two wires. Both of them can be connected to the positive (+) or neutral (-) connection.

The door magnet is secured against voltage reversal and can be used with direct and alternating current.

User Manual explosion-safe AR-030 door magnet

Issue April 2020

Ø 4.5 mm mounting holes (4x), mutual distance 55 x 55 mm

490 N

24 V AC/DC ± 10%

100 mA AC / 63 mA DC

IP65 according to EN 60529

Adjustable (360º)

100%

Cable, color coded, 3 x 1 mm², length 5 meters

770 grams

AR-030 DOOR MAGNET

24 VAC/DC, 1.5 W, IP65

F = 490 N

To avoid electrostatic charge clean only

with a damp cloth. Do not use solvents.

Year: 2020

-25 °C < Ta < +50 °C

4 / 6