Altronix HubWay163D Manuale di installazione - Pagina 2
Sfoglia online o scarica il pdf Manuale di installazione per Interruttore Altronix HubWay163D. Altronix HubWay163D 8. Passive utp transceiver hub
with integral camera power
Anche per Altronix HubWay163D: Manuale di installazione (9 pagine), Manuale di installazione (8 pagine)
Stampa la pagina
Altronix HubWay8D/16D Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485
data and power over a single CAT-5 or higher structured cable. Unit provides 8 or 16 camera channels in a space saving
1U EIA 19" rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max.
per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or
HubWayDv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC PTC protect-
ed outputs with surge suppression. An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can
be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable
back to the HubWay8D/16D. In addition, the HubSat4D provides power to these cameras locally to eliminate the
possibility of voltage drop associated with long cable runs.
HubWay8D/82D/83D
Input:
• 115VAC 50/60Hz, 2 amp or
230VAC 50/60Hz, 1.25 amp.
• Primary fuse (internal) is rated at 5 amp/250V.
Video:
• Eight (8) channels of video over twisted pair up to
a distance of 750 ft. per channel.
• Eight (8) 75 ohm video outputs.
Power:
• Unit provides up to 1 amp max. per channel not to
exceed a total of 5 amp (150VA) maximum current.
Data:
• RS422/RS485 data inputs.
Power:
• Individually selectable 24VAC or 28VAC power outputs
with OFF position.
• PTC protected outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
Visual Indicators:
• AC input power indicator.
Additional Models:
HubWay82D
• HubWay8D includes eight (8) HubWayAv
Video Balun/Combiners for 24VAC Cameras.
HubWay83D
• HubWay8D includes eight (8) HubWayDv
Video Balun/Combiners for 12VDC Cameras.
1. Set the input voltage selector switch located on the left side of the HubWay8D/16D unit (facing front panel)
for 115VAC or 230VAC operation (Fig. 1h, pg. 4).
2. Attach mounting brackets to HubWay unit for rack or wall mount installation (Figs. 6-7, pg. 8). Affix rubber pads
to HubWay for shelf installation (Fig. 8, pg. 8).
3. Secure the unit in a rack, mount unit to a wall or place unit on a shelf as desired (unit should be spaced at least
3" from any video monitors).
4. Set illuminated master power disconnect circuit breaker to the (OFF) position (Fig. 5, pg. 7).
- 2 -
Overview:
HubWay Specifications:
HubWay16D/162D/163D
Input:
• 115VAC 50/60Hz, 4 amp or
230VAC 50/60Hz, 2.5 amp.
• Primary fuse (internal) is rated at 5 amp/250V.
Video:
• Sixteen (16) channels of video over twisted pair up to
a distance of 750 ft. per channel.
• Sixteen (16) 75 ohm video outputs.
Power:
• Unit provides up to 1 amp max. per channel not to
exceed a total of 10 amp (300VA) maximum current.
Common Specifications:
Features:
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U rack mount chassis for use in standard EIA 19" rack.
Accessories:
• Video Balun/Combiners:
- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
HubWay162D
• HubWay16D includes sixteen (16) HubWayAv
Video Balun/Combiners for 24VAC Cameras.
HubWay163D
• HubWay16D includes sixteen (16) HubWayDv
Video Balun/Combiners for 12VDC Cameras.
Installation Instructions:
HubWay Passive Unit