Custom Crimp CC15 Manuale dell'operatore - Pagina 7

Sfoglia online o scarica il pdf Manuale dell'operatore per Utensile a crimpare Custom Crimp CC15. Custom Crimp CC15 10. Hydraulic crimper
Anche per Custom Crimp CC15: Manuale dell'operatore (12 pagine)

Stampa la pagina
SPECIAL FEATURES & MAINTENANCE
Coupling Stop
•
When making repetitive crimps, setting the Coupling Stop eliminates
the need to visually align the couplings each time.
For repetitive crimps, position the hose and fi tting in the correct position
and bring the face of the coupling stop against the fi tting. Tighten the
coupling stop in the correct position.
Retraction Stop
•
When making repetitive crimps, setting the Retraction Stop at a
point where the hose and fi tting can be conveniently withdrawn without
allowing the cylinder to fully retract will greatly reduce the crimp cycle
times.
Lubrication
•
Check the tank sight glass for proper reservoir oil level. If additional oil
is required fi ll with ISO Grade 46 hydraulic oil.
Crimper Head Lubrication
Lubrication passages are drilled in the CC15 die holders. This feature
makes positive lubrication of the wear surfaces much easier assuring
longer life and smoother crimper operation. Foam pads are installed
between the die holders to keep dirt and debris from destroying the die
and piston surfaces.
•
Close the die holders to a position nearly fl ush with the front plate of
the crimper to expose the lubrication fi ttings in the front of the die holders.
Lubricate with the CrimpX grease furnished with the crimper or a moly-
disulfi de lubricant. Failure to use a high quality lubricant can result in
premature wear and possible damage to the master dies and piston
surfaces.
•
The foam pads may be removed to make certain that the grease
passages are open and that grease is getting to the wearing surfaces.
Replace the pads as they are critical to protect the wearing surfaces
from damage.
Page
7
Coupling Stop
Retraction Stop
Foam Filler Pads
Grease Fitting Holes
Flush Style Grease
Coupler Required