djpower XUN V-5 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Attrezzature per DJ djpower XUN V-5. djpower XUN V-5 17.

Stampa la pagina
V-5 USER MANUAL
Remaining Time
10次
Temperature Set
【 450 】
Warm-Up
ON/OFF
Pressurize Set
ON/OFF
Output delay time
0.5S
Advanced
Settings
Feeding Test
ON/OFF
Blower Test
ON/OFF
Feeding time set
100MS
Feeding time set
0.5S
Manual work set
Press ENTER to
Exit Settings
5.4
DMX control mode and operation
V-5 can be operated with DMX mode.
•
Connect the machine to a suitable power outlet.
Device remaining time
Press <ENTER> for 3 seconds to enter the advanced setting menu page, then press
<MENU> to select the corresponding menu, and press ▲ or ▼ to select an option or value.
Device operating temperature settings
Current temperature 450℃, set temperature 580℃
580
Automatic warm-up function when power on
Automatically pressurizes when preheat is on, and
does not pressurize when preheat is off.
When the standby function is turned on, it must be
preheated and pressurized before the injection can
be started.
output delay setting
After the machine starts spraying, wait a fixed time
before spraying. The fixed time is the injection delay
time set under this menu
Open the blanking and feeding system to test
whether it works normally
Turn on the blower and test if it works
Seed filling setting
The longer the time, the larger the filling amount
Seed filling time setting
This time setting is less than the injection delay time
Manual work settings
When it is turned on, the "Test spray interface" will
appear on the user menu page, which is used to
manually test the spray effect. When the device is
ON/OFF
powered off and restarted, this function setting will
disappear, and it needs to be reset to use it again.
Press ENTER to exit the advanced menu settings
9
530℃-630℃
ON/OFF
ON/OFF
0.5-2S
ON/OFF
ON/OFF
100MS-300MS
0.5S-3S
ON/OFF