djpower DSK-1800 Manuale d'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale d'uso per Macchina della nebbia djpower DSK-1800. djpower DSK-1800 12.
Stampa la pagina3.3. Explanation of menu and display
3.3.1. Explanation of the buttons
You will find 6 buttons on the machine:
FUNCTION:
Press the button to scroll through the menu
UP:
Press the button to increase the value
DOWN:
Press the button to decrease the value
TIMER:
Press to start the Timer Function
VOLUME:
Press to set the amount permanent fog output
MANUAL:
Press to trigger the maximum output
3.3.2. Setting up the remote
When the Wireless Controller function is turned on in the menu, the above shown bar chart will be
shown in the display. In the following 15 seconds you will be able to pair the remote. Press one of the
buttons on the remote. The display will flash 2 times for confirmation. You are able to pair the remote
to another machine, or more than one machine to the same remote in this way.
3.3.3. DMX Setup and usage
•
Press FUNCTION until the display shows "ADD XXX"
•
Use the UP / DOWN keys to set a value between 001 – 512
•
Consider that one machine uses 1 DMX channel
•
DMX value from 0 to 5 means the machine is in standby. If you raise the level from 6 - 255
you will increase the amount of output
3.4. Timer Function
If you want to use the timer function for the remote you just have to push TIMER once on the machine.
Pushing it again will end the Timer Function for the remote.
3.4.1. Interval
•
Press FUNCTION until the display shows "Interval Set"
•
Use the UP / DOWN keys to set a Interval between 1 – 200 seconds
•
This setup is required if you want to use the Timer function
3.4.2. Duration
•
Press Function until the Display shows "Duration"
•
Use the UP / DOWN keys to set a Duration between 1 – 200 seconds
•
This setup is required if you want to use the Timer function
6 / 12