Altronix eBridge1PCTX Manuale di installazione
Sfoglia online o scarica il pdf Manuale di installazione per Ricevitore Altronix eBridge1PCTX. Altronix eBridge1PCTX 4. Ip and poe+ over coax solution ebridge1pcrx receiver and ebridge1pctx hardened transceiver kit
Anche per Altronix eBridge1PCTX: Manuale di installazione (4 pagine), Manuale di installazione (4 pagine)
Stampa la pagina
eBridge1PCRTX - IP and PoE+ over Coax Solution
eBridge1PCRX Receiver and eBridge1PCTX Transceiver kit
The eBridge1PCRX and eBridge1PCTX are CAT5 to Coax cable Ethernet adapters media converters that deliver data and
power over the coax cable in a PoE+ compliant format. The paired set enables fast 10/100 Base-T Ethernet digital commu-
nication to be transmitted over Coax cable. An eBridge1PCRX receiver sends power over the coax to the eBridge1PCTX
transmitter under PoE protocol. The eBridge1PCTX in turn delivers that PoE+ compliant power to a PoE enabled camera
or IP device. The eBridge1PCRX will not deliver power to non compliant devices, thus avoiding accidental power turn into
improperly connected analog cameras. These plug and play units facilitate system upgrades from analog to IP cameras/
devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling.
In addition, data transmission over the Coax is possible up to 457m in comparison to 100m Ethernet maximum distance
(see Maximum Length of Coax Type vs. Camera Power/PoE Class, pg. 3). A maximum range from head end to the PoE
camera/device is 610m taking into consideration that up to 100m of structured cable may be deployed at each end.
Agency Listings:
• UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
• CE approved.
• C-Tick compliant.
Input:
• 24VDC to 56VDC Class 2 power supply
(polarity observed).
Power Consumption (under maximum load):
• eBridge1PCRX: 24VDC/1,500mA, 56VDC/900mA.
eBridge1PCTX (30W): Powered by eBridge1PCRX.
eBridge1PCT (15W): Powered by eBridge1PCRX.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5 or better structured cable.
• Distance: up to 100m.
• Speed: 10/100 BaseT, half/full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) and PoE+
compliant to IEEE 802.3at (30W) Delivered to
camera by eBridge1PCTX. Power provided by
eBridge1PCRX to eBridge1PCTX by PoE protocol.
• Throughput is rated to pass 25mbps of data at
distances up to 457m. With proper headend
equipment this supports Megapixel, HD720, HD1080.
Coax:
• Distance: up to 457m (see Maximum Length of Coax
Type vs. Camera Power/PoE Class, pg. 3) for power
delivery of coax.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• eBridge1PCRX:
Blue LED - Coax link connection.
Green - PoE ON.
Green - Power ON.
eBridge1PCRX/PCTX
Installation Guide
PLUS
Overview:
Features:
LED Indicators (cont'd):
• eBridge1PCRX:
Yellow and Green LED (RJ45) IP Link status,
10/100 Base-T/active.
• eBridge1PCTX:
Blue LED - Coax link connection.
Green LED - PoE from eBridge1PCR.
Environmental:
• Operating Temperature:
eBridge1PCRX:
15W: -- 4ºF to 113ºF (--20ºC to +45ºC).
30W for 24VDC: --4ºF to 98.6ºF (--20ºC to +37ºC).
30W for 48VDC: -- 4ºF to 113ºF (--20ºC to +45ºC).
eBridge1PCTX: ---4ºF to 120.2ºF (--20ºC to +49ºC).
• Storage Temperature: --22º to 158ºF (--30º to +70ºC).
• Humidity: 20 to 85%, non-condensing.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog CCTV
installation.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras (see note, pg. 2).
• Extend Network link distance in an industrial
environment over 610m (see note, pg. 2).
• Upgrade deployed CCTV Coax to a digital network
in Retail, Hospitality, Arenas, Casinos, Airports,
Schools, Hospitals, Transportation, etc.
Mechanical:
• Dimensions (W x L x H approx.):
eBridge1PCRX:
3.5" x 4.375" x 1" (88.89mm x 111.125mm x 25.4mm)
eBridge1PCTX:
2.5" x 4.375" x 1" (63.5mm x 111.125mm x 25.4mm)
Rev. 022213
I.T.E. 43KC
Z1409
- 1 -