Altronix PacePRM Series Manuale di installazione - Pagina 2
Sfoglia online o scarica il pdf Manuale di installazione per Ricevitore Altronix PacePRM Series. Altronix PacePRM Series 8.
Stampa la pagina
Pace4/8/16PRM are long range Ethernet receivers that transmit data at 100Mbps full duplex and power via CAT5e
or higher cable in a PoE(+) compliant format. Pace4/8/16PRM receivers are powered via a PoE midspan, such as
the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over the cable to
the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play
units facilitate cost effective solutions for IP devices that need to be installed at the distances greater than 100m.
They also provide a simple way to replace legacy analog products with new IP devices over structured cable.
Agency Listings:
• UL 60950-1
• CE
• C-Tick
Input (Pace4/8/16PRM):
• Powered by midspan or endspan.
PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W).
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5e.
• Distance: up to 500m.
• Speed: 100BaseT, full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W) delivered
to camera by Pace1PTM/Pace1ST.
Power provided by Pace4/8/16PRM to
Pace1PTM/Pace1ST by PoE protocol.
CAT5e or Higher:
• Throughput is rated to pass 100Mbps of data at
distances up to 500m. With proper headend
equipment this supports Megapixel, HD720,
HD1080.
• Distance: up to 500m @ 100Mbps (see Maximum
Length of CAT5e Type vs. Camera Power/PoE
Class, pg. 4).
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes
and authorities having jurisdiction. Wiring should be UL Listed and/or Recognized wire suitable for the application.
Pace4/8/16PRM is not intended to be connected to outside plant leads and should be installed indoors within the
protected premises. The Pace4/8/16PRM and Pace1PTM are intended for indoor use only.
Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient tempera-
ture of the rack environment may be greater than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified
by the manufacturer.
Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for
safe operation of the equipment is not compromised. Do not obstruct any air vents on the unit. It is recommended
to leave half space above and below the unit.
Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not
achieved due to uneven mechanical loading.
Note: Caution: once PoE connection is established between Pace4/8/16PRM and Pace1PTM, disconnecting
the CAT5 from Pace1PTM will not disable the PoE compliant voltage from the Pace4/8/16PRM. Although the
Pace1PTM can be reconnected, caution should be taken not to connect the CAT5 wiring from Pace4/8/16PRM
to any non-PoE device.
- 2 -
Information Technology
Equipment.
European Conformity.
C-Tick compliant.
Installation Instructions:
Overview:
Features:
LED Indicators:
• Refer to Technical Specifications chart, page 5 .
Environmental:
• Operating and Storage Temperature:
Refer to Technical Specifications chart, page 5 .
• Humidity: 20 to 85%, non-condensing.
Applications:
• Works with Megapixel, HD720, HD1080 and
VGA (SD) cameras (see note, pg. 2) .
• Extend Network link distance in an industrial
environment (see note, pg. 2) .
Mechanical:
• Dimensions (H x W x D approx.):
Pace4PRM:
1.7" x 5.25" x 8.42"
(43.8mm x 133.4mm x 213.9mm)
Pace8PRM/16PRM:
1.625" x 19.125" x 8.5"
(42mm x 486mm x 216mm)
Pace1PTM:
1" x 2.5" x 4.375"
(25.4mm x 63.5mm x 111.1mm)
Pace1ST:
2.27" x 2.645" x 1.12"
(57.7mm x 67.2mm x 28.4mm)
Pace4/8/16PRM Installation Guide