DK2 Power OPC503 Manuale di montaggio - Pagina 8

Sfoglia online o scarica il pdf Manuale di montaggio per Attrezzature per l'edilizia DK2 Power OPC503. DK2 Power OPC503 13. Chipper shredder top loading
Anche per DK2 Power OPC503: Manuale di montaggio (15 pagine), Manuale di istruzioni (14 pagine), Manuale di installazione (20 pagine)

Stampa la pagina
DK2 Power OPC503 Manuale di montaggio
Your Chipper is equipped with dual REVERSABLE cutting blades.
1. Turn engine key off, remove the key and unplug the spark
plug on the engine.
2. Remove the rear cover on the chipper housing
3. Before removing the bolts that mount the blades, place
paper towels in the area opening under the blade and the
drum housing. This will help to catch bolts from dropping
into the bottom of the drum housing.
4. Remove the first bolt.
5. Before removing the last bolt be sure to support the blade
from sliding down into the drum.
6. Remove the blade, reverse it to the new sharp edge and
reinstall it. Use only DK2 POWER OEM blades.
7. Use Loctite on the bolt threads when replacing bolts.
8. Remove the feed chute to access additional blades.
Step 2
Step 8
Step 4
Step 8
Step 5