CUSTOM ULTRASONICS 20000 Manuale dell'operatore - Pagina 9
Sfoglia online o scarica il pdf Manuale dell'operatore per Immagazzinamento CUSTOM ULTRASONICS 20000. CUSTOM ULTRASONICS 20000 11. Endoscope storage cabinet
Anche per CUSTOM ULTRASONICS 20000: Manuale dell'operatore (7 pagine)
CUSTOM ULTRASONICS, INC.
5. Place the control head of each endoscope into the holding bracket and hang it vertically.
a. Take caution when reaching up to load an endoscope into the cabinet.
endoscope(s) into the Storage Cabinet, moisture may make the floor in front of the Storage
Cabinet slippery.
i. Make certain the area in front of the Storage Cabinet is dry.
ii. Make certain the area in front of the Storage Cabinet is free of obstructions.
b. Each of the four brackets is designed to hold one or two endoscopes (endoscope model
dependent).
Note: Never attempt to place more than two flexible endoscopes into any one holding bracket.
Note: The Storage Cabinet is designed for up to eight scopes maximum. Do not attempt to
store more than the Storage Cabinet's intended capacity.
c. Make certain the endoscope is properly and securely placed in the holding bracket.
CAUTION: Failure to confirm this could cause the endoscope to fall within the Storage Cabinet
d. To avoid damage to an endoscope, make certain that no parts of the endoscope are hanging
outside of the door.
CAUTION: Closing the door on the endoscope may cause significant damage to the
e. To avoid damage to an endoscope, use caution when placing the endoscope into the cabinet.
CAUTION: Rough handling or allowing the endoscope's tip to hit the wall of the Storage Cabinet
f.
Always follow the endoscope manufacturer's recommendation for endoscope storage. Consult
the endoscope manufacturer for proper techniques.
CAUTION:
6. Attach the endoscope channels to the air purge manifold by an adapter.
a. The manufacturer and model type of the endoscope determines the type of adapters that are
necessary to use.
b. The majority of the adapters are provided by Custom Ultrasonics, but at times, model dependent,
require OEM parts in conjunction with adapters from Custom Ultrasonics. For the Endoscope
Storage Cabinet, Model 20000, manifold attachments, contact Custom Ultrasonics Customer
Training department for assistance.
CAUTION:
7. Place the operating buttons for the endoscopes into the accessory trays located on the interior left side
of the Storage Cabinet.
8. Turn on the Storage Cabinet and the green LED should illuminate to indicate the device is powered on.
The Storage Cabinet's On/Off switch and green LED are located outside of the device on the right front
wall (See Illustration 1).
MAN-009
and it could be damaged.
endoscope.
may cause endoscope damage.
Make certain the endoscopes are not hanging out of the cabinet. This could result
in damage to the endoscope and/or Storage Cabinet when closing the door.
One adapter must remain in the adapter manifold at all times to prevent damage
to the air pump.
Revision 08232021
Endoscope Storage Cabinet
Model 20000
Operator's Manual
When loading
Page 9 of 11