Artistic Licence railSplit uno Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Multiplexer Artistic Licence railSplit uno. Artistic Licence railSplit uno 10.

Stampa la pagina

Operating Modes

The product can operate in two modes. In its default mode, the product is a fully-featured RDM
Splitter. In the second mode, it acts as a DMX Fixer.

Splitter Mode

In splitter mode, the output operates as a bi-directional RDM port and all DMX data received is
passed onto the output. The indicators have the following meaning:
Top (Data):
OFF = no data received
y
Green = DMX and RDM received
y
Yellow = DMX only received
y
Middle (Power):
Green = Power
y
Red = Data error or collisions detected
y
Fix Mode
Fix mode is intended to solve product compatibility problems. Unfortunately, there are numerous
products on the market which will not accept the wide range of legal DMX timings and data. Fix
mode cleans out any unusual or non-standard timing and data before sending to the output. This
includes stripping out all non-zero start codes (including RDM), forcing a 512-channel footprint
and calming any timing jitter. Indicators have the following meaning:
Top (Data):
As above
y
Middle (Power):
Green = Power
y
Red = I am fixing something
y
Detailed Fix Specification
Accepts and corrects break in range 56 µs – 1000 µs and outputs 250 µs
Accepts and corrects MaB in range 5 µs – 1000 µs and outputs 30 µs
Accepts and corrects MaB in range 0 µs – 1000 µs and outputs 30 µs
Accepts channel count 1 – 512 and outputs 512
Accepts refresh period from 23 ms – 1000 ms and outputs 30ms
Filters out multiple consecutive breaks
Re-times bytes of 1 stop bit to 2 stop bits
Filters out all non-zero start code packets
Re-times digital signal
railSplit uno User Guide
Page 6