Altusen KH1508Ai Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Interruttore Altusen KH1508Ai. Altusen KH1508Ai 2. Cat 5 high-density kvm over the net

Stampa la pagina

KH1508

/ KH1516

Cat 5 High-Density

KVM Over the NET™ Quick Start Guide

International Co., Ltd. www.aten.com

Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd.

PAPE-1214-Y30G

Printing Date: 09/2012

This product is RoHS compliant

All information, documentation, and specifications contained in this media are subject to change without prior notification by the manufacturer.

Please visit our website to find the most up to date version.

Package Contents

Important Notice

1 KH1508

or KH1516

Cat 5 High-Density

Considering environmental protection, ATEN

KVM Over the NET™ Switch

does not provide a fully printed user manual for

1 Firmware Upgrade Cable

this product. If the information contained in the

1 Laptop USB Console Cable

Quick Start Guide is not enough for you to

1 Power Cord

configure and operate your product, please visit

1 Rack Mount Kit

our website www.aten.com, and download the

1 Foot Pad Set (4 pcs.)

1 User Instructions

full user manual.

Requirements

General

• For best results, we recommend that the computers used to access the KH1508

at least a P III 1 GHz processor, and that their screen resolution is set to 1024 x 768

• For best results, we recommend an Internet connection speed of at least 128 kbps

• Browsers must support 128 bit data encryption

• To run the Windows client, you must have DirectX 8.0 or higher installed

• To run the Java client, you must have Sun's JRE 6 update 3 or higher installed

• To run the Log Server, you must have the Microsoft Jet OLEDB 4.0 (or higher) driver installed

Console

• A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on

any computer in the installation.

• A USB or PS/2 style mouse

• A USB or PS/2 style keyboard

Computers

The following equipment must be installed on the computers that connect to the KH1508

KH1516

's KVM ports:

• A VGA, SVGA or Multisync port

• A Type A USB port and USB host controller (for USB KVM Adapter Cable Connection, see

below)

• 6-pin mini-DIN keyboard and mouse ports (for PS/2 KVM Adapter Cable Connection, see below)

KVM Adapter Cables

• Cat 5e/6 cable is required to connect the KH1508

/ KH1516

• The following KVM adapter cables are required for use with the KH1508

Function

Module

Connect to devices with PS/2 ports

KA7920 / KA7520 / KA7120 / KA9520 / KA9120

Connect to devices with USB ports

KA7970 / KA7570 / KA7170 / KA9570 / KA9170

Connect to Sun Legacy systems (with 13W3 port) KA9130 / KA7130

Connect to Sun USB systems

KA9170 / KA7170

Connect to serial based devices

KA9140

1. Port Selection Pushbuttons

Online Registration

2. Port LEDs

• http://eservice.aten.com

3. Reset Switch

Technical Phone Support

International:

4. Laptop USB Console Port

• 886-2-8692-6959

China:

• 86-10-5255-0110

Japan:

• 81-3-5615-5811

Korea:

• 82-2-467-6789

North America:

• 1-888-999-ATEN Ext: 4988

United Kingdom:

• 44-8-4481-58923

1. Power Socket

2. Power Switch

3. LAN Port

4. PON Port

Note: The front and rear panel views are similar for the KH1508

KH1508

5-1

Rack Mounting

/ KH1516

have

The KH1508

front or the back of the unit so that it can attach to the front or the back of the rack. To rack mount the unit:

1. Remove the screws at the front or the rear, as shown in the diagram below.

2. Screw the mounting brackets into the sides of the unit at the front or the rear, as shown in the diagram below.

to one of the KVM adapter cables.

/ KH1516

3. Slide the unit into the front or rear of the rack and secure it to the rack.

Hardware Review (Front View)

1&2

5. Firmware Upgrade Recovery Switch

6. Firmware Upgrade Port

7. Power LED

8. Station ID LED

Hardware Review (Rear View)

5. Daisy Chain Port

6. Grounding Terminal

7. Local Console Port Section

8. KVM Port Section

, the difference being that the

has only one row of LED lights (front) and one row of CPU ports (rear)

Hardware Installation

/ KH1516

can be mounted in a 19" (1U) racks. The mounting brackets can screw into either the

Phillips head hex

M3 x 6

Phillips head hex

M3 x 6

Phillips head hex

M3 x 8

5-2

Hardware Installation

Single Station Installation

In a single stage installation, there are no additional KVM switches daisy chained down from the KH1508

KH1516

. To set up a single stage installation (the numbers in the diagram correspond with the numbers of the

(KH1516

)

instruction steps), and do the following:

1. Ground the KH1508

/ KH1516

by connecting one end of the grounding wire to the grounding terminal, and

the other end of the wire to a suitable grounded object.

Note: Do not omit this step. Proper grounding helps to prevent damage to the unit from surges or static

electricity.

2. Plug the console keyboard, monitor, and mouse into the unit's console ports. The ports are color coded and

marked with icons for easy identification.

Note: You can use any combination of keyboard and mouse connections. For example, you can use a PS/2

keyboard with a USB mouse.

3. If you are using a laptop to control the KH1508Ai / KH1516Ai locally, use the Laptop USB Console Cable

included in the package to connect the laptop to the KH1508Ai / KH1516Ai's Laptop USB Console port, located

on the unit's front panel.

4. Use Cat 5e/6 cable to connect any available KVM port to a KVM adapter cable that is appropriate for the

computer you are installing

Note: To support a resolution of 1280x1024@75Hz, the recommended maximum distance between the unit and

the KVM adapter cable is 50 meters; to support a resolution of 1600x1200@60Hz, the recommended

maximum distance is 40 meters.

5. Connect the KVM adapter cable to the computer.

Plug the connectors on the KVM adapter cable into the appropriate ports of the computer you are installing.

6. Plug the LAN or WAN cable into the KH1508

(KH1516

)

7. Plug the female end of the power cord into the KH1508

AC power source.

After the KH1508

/ KH1516

is cabled up, you can turn on the power. After it is powered up, you can turn on the

servers.

/ KH1516

's LAN port.

/ KH1516

's power socket; plug the male end into an