Customatic SQUIRE Manuale d'uso - Pagina 11
Sfoglia online o scarica il pdf Manuale d'uso per Arredamento per interni Customatic SQUIRE. Customatic SQUIRE 16. Adjustable bed frame
Stampa la paginaSynchronizing two beds for tandem operation
Your adjustable bed frame is pre-programmed to your remote. However, to operate two adjustable beds together,
you must pair both to one remote control. Make sure your first adjustable bed (Bed A) is plugged in before focusing
on your second adjustable bed (Bed B). To complete the pairing, do the following:
1
Plug Bed B to a grounded electrical outlet. A surge protector
is recommended.
Once plugged in, the LED light on the control box will blink
three (3) times, which indicates the control box has entered
Learning Mode. Learning Mode lasts seven (7) seconds.
2
During Learning Mode, take Remote A and press the HEAD
UP and FOOT UP buttons at the same time for three (3)
seconds.
The LED light on the control box will light up and remain on,
which means the pairing is successful.
Bed A and Bed B now functions in tandem using Remote A.
Pairing of the two adjustable bed frames is complete.
Resetting your system
Resetting the system is sometimes necessary to:
•
Restore the system to its factory setting.
•
Clear a system error.
•
Synchronize tandem units that no longer work in tandem.
•
Change a tandem system to a single system or to two independent systems.
1
Unplug the power cord from the electrical outlet.
2
Press and hold the FLAT button to continue sending a signal
to the control box, and then plug the power cord back into
the electrical outlet.
3
Wait for seven (7) seconds, and then release the FLAT button.
NOTE:
The control box must receive the Flat signal from the
remote control for at least 5 seconds after the power cord is
plugged back in.
Resetting your system is now complete.
Remote Control Guide
LED light on the control box
11