Customatic SQUIRE Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Arredamento per interni Customatic SQUIRE. Customatic SQUIRE 16. Adjustable bed frame

Installation Guide

NOTE:

For safety reasons, lifting of the adjustable bed frame must always be performed by two

(2) people; and the unit should always be on a flat surface before opening.

Setting up your adjustable bed frame

FOR TWIN, TXL, SQ, SCK, FULL, FXL, AND QN MODELS

Lift the bed frame unit out of the shipping carton carefully,

and put it on a flat floor with the top side facing downward.

Remove all accessory boxes and cut the orange ties from

inside the bed frame.

FOR KING AND CAL KING MODELS

Lift the two separate sections of the bed frame out of the

shipping carton carefully, and put them on a flat floor with

the top side facing downward.

Remove all accessory boxes and cut the orange ties from

inside the bed frame.

Move the head and foot sections of the bed together. Make

sure the bars and frames are properly aligned.

To connect the head and foot sections, lift and place the foot

section cleats (A) over the frame stern peg (B) on the head

section. Insert B into A.

Insert the inner steel pin (C) into the cleat hole to ensure

stable assembly.

Repeat steps 4 and 5 on the other side of the frame.