Alula RE606M Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Accessories Alula RE606M. Alula RE606M 2. Tilt sensor connect+ encrypted
Stampa la pagina
Pro Tip
3M VHB Tape works great for mounting if the surface is properly prepared and firm
pressure is applied for over 10 seconds.
Surface Preparation
• Clean the surface
• Ensure the mounting surface temperature is above 50 °F
Specifications
Physical
Housing Dimensions
Weight with Battery
Mounting Fastener
Cover-Securing Screw
(optional, not provided)
Environmental
Operating Temperature
Maximum Humidity
Sensor Specifications
Frequency
Replacement Battery
Battery Life
Battery Voltage
Current Draw
Transmitted Indications
Certification
RE606M
TRADEMARKS
Alula, Connect+, and AlulaConnect are trademarks owned by
Alula Holdings, LLC. All trademarks, logos and brand names are
the property of their respective owners. All company, product
and service names used in this document are for identification
purposes only. Use of these names, trademarks and brands does
not imply endorsement.
FCC NOTICE
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may be received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by Alula could
void the user's authority to operate this equipment.
FCC ID: U5X-RE301
3.25 x 1.40 x 1.05 inches (8.3 x 3.6 x 2.7 cm)
1.90 ounces (54 grams)
#4 or #6 screws (not provided)
Pan Head, #1 x .25 inches, A/AB Thread Forming (sheet metal)
screw, McMaster 90190A051
0 to 120 °F (-18 to 49 °C)
85% non-condensing relative humidity
433.92 MHz
One Panasonic CR123A
10 to 15 years
3.0 VDC (Nominal), 2.2 VDC (Low)
20 mA (Maximum), 0.6 uA (Quiescent)
Cover Tamper, Low Battery, Supervision
FCC, IC
Specifications subject to change without notice
47-00021 • REV A • 2022-10-05
Tech Support Line • (888) 88-ALULA • (888) 882-5852
IC NOTICE
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux cnr d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes:
(1) L'appareil ne doit pas produire de brouillage, et
(2) L'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
IC: 8310A-RE301
alula.com