Alula RE114 Manuale di avvio rapido - Pagina 8

Sfoglia online o scarica il pdf Manuale di avvio rapido per Allarme fumo Alula RE114. Alula RE114 12. Smoke alarm interlogix compatible

Stampa la pagina

Figure 5

ROTATE UNIT ANTI-CLOCKWISE

UNIT WILL NOT TWIST OFF - IT MAY BE

TAMPERPROOFED - SEE FIGURE 8

6. Carefully line up the Alarm on to the

mounting plate, gentle press home and

twist clockwise.

Install all the other Alarms similarly.

7. Press the Test button on each Alarm

to ensure that the Alarm works (see

Figure 6).

Figure 6

Smoke Alarm

Tamper-proofing the Alarm

The Alarm can be made tamper-proof

to prevent unauthorized removal of the

Alarm.

Break off the small pillar on the base

as shown in Figure 7a. To remove the

Alarm from the ceiling it is now necessary

to use a small screwdriver, to release the

catch (push catch towards the ceiling)

and then twist off the Alarm (see Figure

7b).

Figure 7a - How to Tamperproof

Figure 7b - How to Remove

If necessary it is possible to further

secure the Alarm by using a No.2 or

No.4 (2 to 3mm) (1/8") diameter - not

supplied) self tapping screw 6 to 8mm

(1/4") long (see Figure 7d), to firmly

lock the Alarm and its mounting plate

together (see Figure 7c).

Figure 7c

Figure 7d

Attach the Alarm to the mounting plate.

Line up the screw (not supplied) on

the "U" shaped recessed area shown in

Figure 7c and screw firmly home.

To remove the Alarm from the ceiling,

remove the screw first, and then twist off

anti-clockwise.

Your Alarm is a life saving device and

should be checked periodically.

BREAK OFF

7.1 Manually Testing your Alarms

SMALL PILLAR

It is recommended that you test your

Alarms after installation and then at least

weekly to ensure the units are working.

It will also help you and your family to

become familiar with the sound of the

Alarms.

- Press and hold the Test Button until

the Alarm sounds and the red light

flashes (see Figure 7). The Alarm will

PUSH UP CATCH & TWIST

ALARM ANTI-CLOCKWISE TO REMOVE

TAMPERPROOF SCREW

SELF TAPPING

SCREW

2 to 3 mm

7. Testing, Maintenance and

Power Supply Monitoring