Cutting Edge esri Data Appliance 5.1 Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Data Loggers Cutting Edge esri Data Appliance 5.1. Cutting Edge esri Data Appliance 5.1 2. For arcgis

Stampa la pagina

Data Appliance 5.1 for ArcGIS

Data Collection Update for Windows

ArcGIS 10.1 for Server

Quick Start Guide

Overview

The purpose of the Quick Start Guide is to step you quickly and easily through the update

of a Data Appliance 5.1 collection. This Quick Start Guide is for use with ArcGIS

Server. The update consists of the following steps:

Step 1

Unpack the Components

Step 2

Delete ArcGIS Services

Step 3

Shut Down Data Appliance for ArcGIS

Step 4

Remove Old/Install New Data Collection

Step 5

Power On Data Appliance for ArcGIS

Step 6

Verify New Data Collection

Step 7

Create Shares

Step 8

Con gure ArcGIS Server to Use Cache Directory

Step 9

Publish Services

Step 10

Use Services

Before Starting

ArcGIS Server 10 SP5 or higher is required for Data Appliance 5.1. If you are planning to

upgrade to ArcGIS 10.1 for Server, Esri recommends you do so prior to installing your new

collection. If you are using ArcGIS Server 10, please refer to the Quick Start Guide Data

Appliance for ArcGIS 10 Data Collection Update for Windows. Services for Data Appliance

for ArcGIS data collections installed on your Data Appliance for ArcGIS server will be

unavailable during the installation process. This update should take approximately two

hours to complete.

Note: If you are using locators and routing services from Data Appliance 5.0 for ArcGIS,

since locators and routing services are no longer included as part of the Data Appliance with

the 5.1 release, you need to migrate to StreetMap

interest prior to upgrading to Data Appliance 5.1 for ArcGIS. Additionally, if you were using

the World Places Locator from Data Appliance 5.0, you need to upgrade to the World Places

Locator that shipped with Data Appliance 5.1 on a separate DVD before upgrading to Data

Appliance 5.1 for ArcGIS.

Important: It is imperative that care and precautions be taken when handling the data

collection hard drives. The hard drives are sensitive to shock as well as electrostatic

discharge. Make sure precautions are taken to eliminate any built-up static. The use of a

grounding strap is highly recommended while handling the hard drives.

Unpack the Components

Your shipment contains one of the following Data Appliance for ArcGIS

collections: World Premier Collection, World Small-Scale Collection, North

America Collection, or Europe Collection; a collection consists of two or more

drives that make up a single RAID volume. Each drive is labeled with the

collection name and version.

Delete ArcGIS Services

To update the Data Appliance for ArcGIS collections, ArcGIS Services that

utilize the Data Appliance 5.0 services must be deleted from ArcGIS Server

before you disconnect the Data Appliance 5.0.

A. Log in to ArcGIS Server using the Data Appliance for ArcGIS data account

with administrative privileges.

B. Start ArcGIS Server Manager and log in using your account.

C. Click Services > Manage Services.

D. Check each service to select the services to stop.

E. Locate the service in the Services module and click Delete. The service is

deleted from your server.

Basemap Collection Services

World Imagery Collection Services

Map Services

World_Boundaries_and_Places

World_Imagery

World_Street_Map

USA_Topo_Maps

World_Topo_Map

World_Transportation

Geocode services

TA_Address_EU

TA_Address_NA_10

Routing Services

ESRI_Route_EU

ESRI_Route_NA

10.1 for

Premium for ArcGIS for your regions of

™

World Collection Services

Map Services

DeLorme_World_Base_Map

Ocean_Basemap

World_Boundaries_and_Places

World_Boundaries_and_Places_Alternate

World_Imagery

World_Navigation_Charts

World_Physical_Map

World_Shaded_Relief

World_Street_Map

World_Transportation

Globe Services

ESRI_Elevation_World

USGS_Elevation_US

Shut Down Data Appliance for ArcGIS

Although Data Appliance for ArcGIS has hot-swappable hard drive bays, hot

swapping an entire data collection is not supported.

A. Log in to Data Appliance for ArcGIS using the Administrator account.

B. Click the Start menu, expand the Shutdown menu, and select Shut down.

C. Allow Data Appliance for ArcGIS to completely shut down.

Remove Old/Install New Data Collection

A. With Data Appliance for ArcGIS powered off, remove the existing data col-

lection hard drives from the Data Appliance for ArcGIS system.

B. Place the removed hard drives in a secure and static-free location.

C. Continue removing all hard drives for the collection to be updated. Do

not leave any hard drive from the old data collection in Data Appliance

for ArcGIS.

132176

ESRI 11/12kq

Depending on the con guration being serviced, use the above illustrations as guides, with

1U on the left and 4U on the right.

With Data Appliance for ArcGIS still powered off, install the new data

collection hard drives into Data Appliance for ArcGIS. Note that the

new hard drives are labeled as to what collection they belong to as

well as the number of drives in the set, for example, World Premier

Collection Drive 00 1 of 22.

Although it does not matter which slot a drive is installed in, it is recom-

mended that drives be installed in order, starting from the top left, lling in

the drive bays across a row, then proceeding to the row below.

D. Note the label of the hard drive that is to be installed into Data Appliance

for ArcGIS to nd its position. Make sure all drives from each set are pres-

ent. If you nd that a drive is missing, immediately stop the installation

procedure and contact Cutting Edge Networked Storage technical

support.

E. Insert the replacement drive tray into the chassis. Make sure to press the

drive carrier handle closed until it clicks in place.

F. Make sure all drives from all the data collections are installed in Data

Appliance for ArcGIS.

Power On Data Appliance for ArcGIS

To turn on Data Appliance for ArcGIS, press the power button located on the

front of the computer equipment rack.

Note: While booting up, the Windows 2008 Storage Server operating system

performs a number of system checks to verify the integrity of the le system.

During this time, the hard drive activity LEDs on Data Appliance for ArcGIS will

blink. Please do not interrupt the system by powering it off or rebooting it.

Verify New Data Collection

Before utilizing the data collection, the health of the RAID arrays must be

veri ed. Data Appliance for ArcGIS ships with the LSI/3ware 3DM2 utility pre-

installed. This utility will be used to verify the status of the datasets.

A. Log in to Data Appliance for ArcGIS as Administrator.

B. Click the Start menu, expand All Programs, and expand the 3ware folder.

C. Click Connect to 3DM2 to start the 3DM2 utility.

D. Disregard the security warning and click Continue to website (not

recommended).

E. In the Login drop-down menu, select Administrator.

F. Enter the password "3ware" and click Login.

G. The 3DM2 summary screen is displayed. Note the Status column.

H. If the status for all collections is

ready to use. If something other than

click Unit Information. This displays the status of each RAID array (unit).

1. If the status is Verifying, the datasets are ready to use. (Verify

2. If the status is

Click Logout to log out of the 3DM2 utility. Once you have logged out, exit

the web browser.

and green, the arrays are healthy and

is displayed, click Information and

procedures are run on schedules to preemptively correct any errors.)

Degraded

ine, immediately stop and contact

Cutting Edge Networked Storage technical support.