Cutting Edge GL2100 Manuale d'uso - Pagina 12
Sfoglia online o scarica il pdf Manuale d'uso per Data Loggers Cutting Edge GL2100. Cutting Edge GL2100 18.
Stampa la pagina4.3 Parameter Set
4.3.1
Enter the desired coordinates and click the Set button.
The dialogue box will respond with
4.3.2
Setting
RF Channel
Number of Tries
Minimum Interval Between Transmission
Maximum Interval Between Transmission
Click the Set button when complete. The dialogue box will respond with
Page | 12
Set GPS Manually (if no GPS is present)
The next step required to set up the device is to manually set the GPS
coordinates. Select the Set GPS Manually tab and enter the coordinates where
the device is to be installed. The correct coordinates need to be entered for
where the device will be installed. This is required because the device must
switch to channel C if close to a Radio Telemetry site.
Modem / TX Setting
You can now set transmission parameters on the GL2100.
The recommended settings are:
Recommended
Not changeable. Dependent on GPS Coords
2
5 (mins)
10 (mins)