ALURAD Atlantis Istruzioni per il montaggio e l'uso

Sfoglia online o scarica il pdf Istruzioni per il montaggio e l'uso per Riscaldatore ALURAD Atlantis. ALURAD Atlantis 2.

P e r f e c t R a d i a t o r

DIRECTIONS FOR MOUNTING AND USE

70 mm

h-220

135 mm

(n-3)x80 mm

h= Radiator height (mm)

e.g. For atlantis 390, h= 390 mm

For Atlantis 450, h=450 mm

n= Number of radiator columns

e.g. For a radiator with 10 columnsi n= 10

y= Radiator height from the floor (min. 50 mm)

Note: For models with integrated valve,

the center measurement shall be (n-4) x 80 mm

(n-3)x80 mm

Bracket

1st Hole

2nd Hole

Radiator

Hanger

Element

Figure 1

(h-220)mm

Figure 2

Figure 3

Atlantis

A-MOUNTING WITH

HANGER SYSTEM

Mount the radiator without removing it from its nylon

packing. Remove the nylon cover before use after

completion of all alteration and painting works.

The initial putting of the radiator into operation may

be carried out while the nylon cover is on.

Atlantis radiators can be easily mounted on the wall

using the four hanger elements.

For this purpose, first mark the locations of the

brackets on the wall in accordance with the

measurements given in the figure.

Bore the holes on the wall for mounting the brackets

using a drill, according to the measurements given

in the figure.

First mark the location of holes.

Then bore the holes.

Mount the brackets on the wall by tightening their

screws using a screwdriver. The upper mounting

elements should rest on the radiator's upper profile.