Alva AOH201-11 Manuale - Pagina 8

Sfoglia online o scarica il pdf Manuale per Riscaldatore Alva AOH201-11. Alva AOH201-11 11. Oil heater

USING YOUR HEATER

1. Before using the heater, make sure that it is on a level and

stable surface, to prevent damage or a hazardous situation.

2. Set all the controls to OFF position and insert the plug into a

socket-outlet. Be sure that plug fits firmly.

3. Rotate the thermostat knob to the MAX position (Fig 1).

4. Switch on the Power Switch for the heater to start. The pilot

light on the power switch will illuminate (Fig 2).

- Switch I for low heat

- Switch II for medium heat

- Both switches for high heat III

5. When your room reaches the desired temperature, slowly

rotate the thermostat knob counter clockwise until the pilot

light goes out. The thermostat can now be left at this setting.

As soon as the room temperature has dropped below the set

temperature, the unit will switch itself on automatically until

the set temperature has been reached again. In this way the

room temperature remains constant with the most economical

use of electricity.

6. If you want to change the room temperature setting, rotate the

thermostat knob clockwise to raise the temperature, or counter

clockwise to lower it.

7. This heater includes an overheat protection system that shuts

off the heater when parts of the heater becomes excessively

hot.

8. To completely shut the heater off, turn all the controls to OFF,

and remove plug from the socket-outlet.

Fig. 1

Fig. 2

OPERATION OF THE

HEATER

NOTE: It is normal when the

heaters are turned on for the

first time, or when they are

turned on after having not

been used for a long period

of time, the heaters may

emit some smell and fumes.

This will disappear when the

heater has been on a short

while.

Before using the heater,

make sure you understand

the "IMPORTANT SAFETY

INFORMATION"

section of this manual.