AKO AKO-80037T Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Riscaldatore AKO AKO-80037T. AKO AKO-80037T 2. Side drum heater with thermostat

Side drum heater with thermostat
1- Introduction
The AKO silicone side drum heater is a simple and effective method of applying heat to drums and can be used to give quicker warm up times and higher product tem-
peratures. This product is specifically designed for the melting or reducing the viscosity of soaps, fats, varnishes and oil based type products.
The unit comes complete with a 20° to 120C° capillary thermostat, 2 metre high temperature rubber insulated power cable and a simple spring and clip arrangement
that ensures good surface contact with the drum.
2- Versions and references
MODEL
USE
AKO-80034T
For 200L containers
AKO-80035T
For 105L containers
AKO-80036T
For 50L containers
AKO-80037T
Fo
r 25L containers
AKO-80038T
For 200L containers
3- Warnings
-Read all instructions before using the heater.
-When not in use unplug the mains lead.
-Do not immerse the heater in liquids.
-The heater must be used in a dry environment.
-Ensure the supply cable is not in contact with hot surfaces during operation.
-Do not touch the surface of the heater during operation. After switching off allow the heater to cool completely before handling.
-Use the heater only for its intended use, as described in these instructions
-Disconnect from the electrical supply before handling.
-The heater must not be used if it is damaged in any way. If the mains lead is damaged it must be replaced by the manufacturer or a similarly qualified person in order
to avoid hazard, using a special flexible cord.
-The heater should be connected to the electrical supply via a residual current device or other equipment providing protection from electric shock.
-During operation vent the container to avoid build up of internal pressure.
-Check that the voltage marked on the heater corresponds to the electricity supply that it will be connected to which must be ac (Alternating Current).
-A suitable approved plug for the country in which the heater is being used should be fitted to the mains lead by a suitably qualified person.
-Models with the
double insulated symbol do not require an earth connection.
4- Operation
This heater are designed to be used on drums and containers for warming of the contents. Use on metallic containers only.
Secure the heater to the container using the spring.
Set the thermostat to the required temperature.
Obtaining the ideal temperature of the contents must be via experimentation and experience of the material being heated.
Plug the heater into the electricity supply. The red neon indicator will light to show that power is supplied.
The amber neon indicator will light when the heater element is on. When the required temperature is reached the indicator will go out. This process will continue as the
heater cycles.
Disconnect from the supply and remove the heater from the container before discharging the contents. This will avoid contaminating the heater from spillages.
NOTE: the thermostat sensors are positioned to sense the temperature at the junction between the heater surface and container, not the container contents.
5- Maintenance
Before cleaning the heater always disconnect from the electricity supply. Wipe the heater surfaces and terminal box with a damp cloth. Do not use solvents or scouring
agents and never immerse the heater in liquid.
When not in use and after cooling, store the heater in a dry environment, the original packaging can be used for this purpose.
For further information on use or service contact the manufacturer or supplier.
Av. Roquetes, 30-38 | 08812 Sant Pere de Ribes | Barcelona | España
Tel. (34) 938 142 700 | Fax (34) 938 934 054 | e-mail: [email protected] |
Apartado (P.O. Box), 5 | 08800 Vilanova i la Geltrú | Barcelona | España
POWER
POWER SUPPLY
1000W
800W
230 Vac
500W
50-60Hz
300W
1500W
AKO ELECTROMECÀNICA, S.A.L.
Nos reservamos el derecho de suministrar materiales que pudieran diferir levemente de los
descritos en nuestras hojas técnicas. Información actualizada en nuestra web:
www.ako.com
We reserve the right to supply materials that might vary slightly to those described in our
Technical Sheets. Updated information is available on our website: www.ako.com
www.ako.com