3M Digital Projector X75 Manuale di sicurezza del prodotto - Pagina 6

Sfoglia online o scarica il pdf Manuale di sicurezza del prodotto per Proiettore 3M Digital Projector X75. 3M Digital Projector X75 14. Safety guide
Anche per 3M Digital Projector X75: Opuscolo e specifiche (4 pagine), Manuale di avvio rapido (4 pagine), Manuale di avvio rapido (4 pagine), Specifiche tecniche (2 pagine)

•

To reduce the risk associated with choking:

Keep the battery and battery holder away from children and pets.

•

To reduce the risk associated with exposure to hazardous voltage:

Disconnect power cord when the projector is not in use, during lamp

replacement, and while cleaning.

Do not remove any screws other than those speciﬁed in the lamp replacement

instructions.

Do not store or operate this projector in wet environments.

Do not modify this projector.

Do not attempt to service the projector - there are no user serviceable parts,

other than the lamp cartridge, inside the projector. Contact a 3M authorized

service provider for service.

Do not allow water or other liquids to enter the projector.

•

To reduce the risk associated with exposure to hazardous voltage and/or ﬁre:

Replace power cord if damaged.

Contact a 3M authorized service provider if the projector becomes damaged.

Use a grounded extension cord with a rating at least equal to that of the projector.

Connect this projector to a grounded outlet.

•

To reduce the risk associated with hazardous voltage, impact, tripping, and

intense visible light:

Do not use this projector around unsupervised children.

•

To reduce the risk associated with hot surface of lamp cartridge:

Unplug the projector from the electrical outlet and allow the lamp to cool for 45

minutes before replacing the lamp.

•

To reduce the risk associated with a ruptured lamp:

Always handle the fragile lamp module with care.

Remove the projector from the ceiling or wall mount before replacing the lamp.

Use care when replacing the lamp module in the event of a lamp rupture - small

glass particles and small amounts of mercury may be present.

Ventilate the area where the lamp rupture occurred.

Wear safety goggles and gloves when cleaning up ruptured lamp debris.

Carefully collect the ruptured lamp debris in a closed container and dispose of

the container and the expired lamp module in accordance with federal, state,

and local regulations.

Wash your hands thoroughly after handling ruptured lamp debris.

Replace the lamp module when the lamp replacement message appears.

Never replace the lamp module with a previously used lamp module.

WARNING

3M™ Multimedia Projector X75 Product Safety Guide