3M MPRO110 - VGA LCOS Projector Manuale dell'operatore - Pagina 13
Sfoglia online o scarica il pdf Manuale dell'operatore per Proiettore 3M MPRO110 - VGA LCOS Projector. 3M MPRO110 - VGA LCOS Projector 20. Micro professional projector
Anche per 3M MPRO110 - VGA LCOS Projector: Come collegarsi (2 pagine)
Stampa la pagina
3M
™
Micro Professional Projector MPro110
Troubleshooting
Problem
Image is fuzzy
Does not run on battery power
Blank image
LED flashing red
LED is green
LED is orange
Video or VGA icon is flashing
Video/VGA icons alternate
flashing
© 2008 3M. All Rights Reserved.
Cause
Projector-to-screen distance out-
side of limits. Image not focused.
Battery not charged.
Battery needs replacement.
Power is off.
Projector in Power Saver Mode.
Battery is low.
Projector in Power Saver Mode.
Battery is charging.
No input signal is detected by
projector.
No input cable is detected.
13
Solution
Place projector 200–1800 mm
from wall. Turn focus to sharpen
image.
Plug in AC adapter and turn
power switch Off to charge bat-
tery. Replace battery if it will not
hold a charge.
Turn projector ON. Input source
must be powered ON and sending
an input signal.
Plug in AC adapter and turn
power switch Off to charge
battery.
Projected images returns when
input signal resumes.
LED is orange during charging
and goes off when battery is fully
charged.
Turn on power for input source.
Connect input cable and power
on input source.