ACP RiderPro Manuale del prodotto e dell'installazione - Pagina 3
Sfoglia online o scarica il pdf Manuale del prodotto e dell'installazione per Attrezzature per l'edilizia ACP RiderPro. ACP RiderPro 17. Motorcycle protection for acp sentry barrier tl-4 thriebeam system
Stampa la paginaLeading Safety
Flexible Design
Compatibility
Easy Assembly
Ref: IM 031 Rev 00
Date: 15/07/2021
Page 3/17
RiderPro Main Features
Crash tested in Class C60 according to the European Technical
Specification CEN/TS 1317-8, with sliding 86 kg test dummy impacting
at 60 km/h with a 30° angle of impact.
Additionally, the RiderPro, the same design being utilized with the
Sentry Barrier TL-4 ThrieBeam System, has undergone MASH TL-3
compliance crash testing attached to the ACP Sentry W Beam system
with both MASH Test 3-10 ( 1100 kg vehicle) and Test 3-11 (2270 kg
vehicle) successfully tested. It is important to note this compliance
testing is not a specific requirement for motorcyclist protections
systems but was conducted to assure the highest standards of safety
for the motorcyclist safety system are met.
The flexible mounting bracket absorbs rider impact energy providing a
forgiving impact.
The controlled deformability of the corrugated beam contains and
redirects the biker, avoiding any snagging and / or trapping for the
biker on the device.
Designed to fit W and Thriebeam Barrier Systems such as the ACP
Sentry Barrier.
Can be installed in a new guardrail installation or retrofitted to existing
guardrails. RiderPro is easy to assemble and fast to install in all its
applications.
Property of
Margaritelli Ferroviaria S.p.A.
06135 Ponte San Giovanni - Italy