•
To reduce the risk associated with laser radiation, which if not avoided may
result in minor or moderate injury:
-
Never look directly at the laser output of the remote control or point it at other people.
-
Never attempt to make any adjustments to the internal controls of the remote
control other than those described in the Operator's Guide.
•
To reduce the risk associated with explosion, and/or chemicals from a leaking battery:
-
Use only with battery type AA or equivalent.
-
Orient the battery's plus (+) and minus (-) terminals of the batteries according to
the markings found on the remote control.
-
Do not leave the battery in the remote for an extended period of time.
-
Do not heat, disassemble, short, recharge, or expose to fire or high temperature
-
Do not carry batteries loose in your pocket or purse.
-
Avoid eye and skin contact in the event that battery would leak
-
Do not mix used and new batteries.
•
To reduce the risk associated with the impact of a falling projector:
-
Use only the 3M™ brand wall/ceiling mounting hardware kit if wall or ceiling
mounting is desired.
-
Installation of the 3M™ wall/ceiling kit must only be performed by qualified personnel.
-
Adhere strictly to the proper installation procedure as outlined in the installation
instructions when installing the 3M™ wall/ceiling kit.
-
Always operate the unit on a flat, sturdy, and horizontal surface.
•
To reduce the risk associated with intense visible light:
-
Avoid looking directly into the projector lens while the lamp is on.
•
To reduce the risk associated with tripping and/or impact:
-
Position the power cord and data cable so that they cannot be tripped over.
© 3M 2005
CAUTION
3M™ Digital Projector S15/X15 Product Safety Guide
7
Stampa la pagina