DNM AS-04 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Convertitore multimediale DNM AS-04. DNM AS-04 10. With amplifier

Top panel layout

1. Mode Button: Press to scroll between WiFi, Bluetooth and Line In mode

2. Pair Button: Press to make the AS-04 search for Bluetooth devices in

Bluetooth mode

3. Pre-set & Power Button: Long Press – Power on/oﬀ,

4. Volume Down: Press to decrease Volume

5. Volume Up: Press to increase Volume

Initial System Setup

In the box

- AS-04 unit

- Quick Start Guide

- 230V to 24VDC/3A Power Adaptor

Initial Setup Steps

Connect a pair of speaker cables to the appropriate binding posts on the rear of the AS-04

Then connect the other ends to a pair of passive speakers. Ensure positive + and

negative – are matched with the AS-04 and speakers. (Speaker cables are not included

in the packaging.)

Locate the AC/DC power adapter and insert the end into the power input on the rear panel.

Then insert the mains plug into the adapter and connect the other end to a main socket.

Turn on the power switch at the socket and you should hear "Power on – WiFi mode" if the

AS-04 is connected properly to your amp/speakers.

Note:

1. If you're not intending to connect the AS-04 directly to passive speakers, you can

connect a 3.5mm jack cable to the Line Out port and connect the other end to an ampliﬁer

or active speakers. Then follow steps 2-4

2. Make Sure you are connected to 2.4G Wi-Fi as the AS-04 is only compatible with 2.4G Wi-Fi

Short Press - Scroll between selected pre-sets