DNP IDW500 Manuale a passo rapido
Sfoglia online o scarica il pdf Manuale a passo rapido per Fotocamera digitale DNP IDW500. DNP IDW500 2. Steps for successful passport photos
Stampa la pagina
S
S
tepS for
ucceSSful
1. Power ON the System.
• Power ON the photo printer,
IDW500 console, and then
the passport camera.
• When you see the CAMERA
DETECTED message on the
console, you're ready to begin.
This takes about a minute.
2. Take the Photo.
• Fill the black, square head guide
on the camera screen with the
subject's head. (Don't go outside
the guide marks or use the
camera's white focus tracking.)
• Use the standard passport
rules when taking pictures (light
background, no shadows, etc.).
• Review the photo on the camera
LCD. Verify photo follows the
standard rules.
3. Send the Image via DPOF.
• Press PLAYBACK on the camera.
• Press MENU. Scroll up 5 to
DPOF.
• Press SELECT.
4. Return to Shooting Mode.
• Press the PLAYBACK button again just after the DPOF
message appears on the camera screen.
Do not leave the camera in playback mode.
p
p
aSSport
hotoS
Need to order more supplies?
Contact your sales representative.
When speaking with your Sales
Representative, please be
sure to specify you need media
specifically for the IDW500
system.
t
roubleShooting
The image did not transfer to the console/I can't see the
image on the console preview screen.
• Make sure the IDW500 application is active and visible on the console.
• Look for a CAMERA FOUND message on the console. Listen for the
PING sound. Keep in mind that it takes at least one minute for the
camera to connect with the console via Wi-Fi.
• If you are sure the camera is connected, check that the image was
marked for DPOF.
• On the camera, enter PLAYBACK mode.
• Verify that the image has DPOF marked.
• If you are not sure if the camera is connected, power cycle the camera.
• Wait at least one minute. Look for CAMERA FOUND and listen for
the ping.
• If the camera is still not
connected, power cycle the
console.
• On the console, press the
GEAR icon; then press
the SHUTDOWN button.
Wait for the console to shut
down.
• Press the POWER button (side of the console) to restart the
console.
• If the problem persists, contact Tech Support at 844-367-8777.
The same image keeps showing on the preview screen. Why?
• More than likely, the camera is still in playback mode. Press the
PLAYBACK button on the camera to return to shooting mode. Always
return to shooting mode as soon as you see the DPOF mark on the
image.
DOC-Q-IDW500-NA-QPC
Rev: 03.2017
Need to order more supplies?
Please contact your Sales
Representative. When speaking
with your Sales Representative,
please be sure to specify you need
media specifically for the IDW500
system.