Fleet Complete AT1000 Manuale di autoinstallazione - Pagina 2

Sfoglia online o scarica il pdf Manuale di autoinstallazione per GPS Fleet Complete AT1000. Fleet Complete AT1000 4. Asset tracker

Stampa la pagina

Self-installation Guide: AT1000

OVERVIEW OF THE AT1000 LEDS

The AT1000 LED indicator lights have been designed to provide a simple

visual reference regarding the device's current status. The table describes

each status and the respective LED indications.

Device Status

Activation

Attempted activation

with device not in cradle

Deactivation

Device is not registered

on GSM/HSPA network

Device is registered on

GSM/HSPA network

Modem is off (not trans-

mitting)

GPS status: connection

lost or connection found

NO EXTERNAL POWER SOURCE INSTALLATION

To install the unit, perform the following steps:

1. Validate that the unit is setup in the Fleet Complete Application.

2. Install the cradle to a secure location where good GPS coverage can be

achieved.

NOTE: Install the device as close as possible to the front of the trailer

to ensure protection to the device when the trailer is tethered to the tractor.

3. Mount the unit in the cradle. Make sure the tamper switch is pressed.

4. Use nylon cable ties to secure the unit.

5. Wrap or tape each input/output wire

separately to avoid short circuiting and

battery drainage.

HARDWIRE INSTALLATION

To hardwire the unit to power source, perform the following steps:

1. Validate that the unit is setup in the Fleet Complete Application.

2. Install the cradle to a secure location where good GPS coverage can be

achieved and external power can be made available.

device as close as possible to the front of the trailer to ensure protection to the

device when it is tethered to the tractor.

3. Mount the unit in the cradle. Make sure the tamper switch is pressed.

Network/Cell

Power LED

Illuminated

Blinking

Illuminates and

then turns off

Illuminated

Blinks once

Emergency

LED

Button

Pressed

Blinking

OFF

Tamper Switch

Pressed (device in

cradle)

Not pressed

Not pressed (out of

cradle)

NOTE: Install the