Fleet Complete MGS200 Manuale di installazione - Pagina 2

Sfoglia online o scarica il pdf Manuale di installazione per Antenna Fleet Complete MGS200. Fleet Complete MGS200 6. Fleet complete gps/rf combo antenna

Stampa la pagina

Tools Required:

Full compliment of various screw

drivers

Crimping tool for crimp connectors

Wire cutters and strippers

Ring, spade, splice crimp connectors

(red and blue)

Small spools of red and black 16

gauge wire

Digital multimeter

7" black cable ties

Silicone

Soldering iron and solder

Work order/system outline:

Verify the requirements of the installation as described in

the work order

Special instructions should be outlined on the work order

MGS200 Installation Guide

Hardware location and preparation:

Note: It is important to insulate the wires not being used on

the wire harness during the installation. Improper insulation

could result in inaccurate notifications and increased usage on

monthly billing.

Find a suitable location for the MGS if one has not been

•

specified on the work order. The MGS is usually installed

under the vehicle's dash.

Keep the device away from any places of high moisture i.e.

•

under seats, floors, etc.

Prepare all connections for the MGS, cable harness and

•

fuse holder prior to commencing installation.

Feb, 10

Confidential Version 1.4

Page