Fleetrite FLTAMFMRCD Manuale operativo per l'utente - Pagina 10

Sfoglia online o scarica il pdf Manuale operativo per l'utente per Ricevitore per auto Fleetrite FLTAMFMRCD. Fleetrite FLTAMFMRCD 13.

Press MUTE button(14) to mute sound. Press again to restore volume to original setting.

Operating the Radio

1. Press the BND button (6) to select the desired band FM1, FM2, FM3, AM1 or AM2.

2. Manual / Seek tuning buttons (7) : Press this button quickly to activate the Seek mode. The Seek

mode will automatically seek up or down the wave band and stop at the next station of sufficient signal

strength. Press this button (7) for longer than 2 seconds to advance the tuning up or down the wave

band.

3. Manual station store: Select the desired band and tune to a radio station to be memorized. Choose

the preset button memory location 1-6 into which the station is to be stored and press and hold that

preset button for 2 seconds. The station will now be entered into the preset memory. 6 stations can be

memorized on each of the FM1, FM2, FM3, AM1 & AM2.

4. A.PS - Auto store function. (16)

Depress and hold button (16) for approximately 2 seconds until you hear a signal which confirms the

memory function is complete and the display shows "SEARCH".

Automatically six strong stations are stored on the station buttons 1 - 6.

You can override the preset station on any button by manually setting a new frequency.

5. Program memory scan

Press the preset buttons 1-6 to find the memorized radio stations.

6. Stereo - / mono - reception

The unit is prepared for stereo reception as soon as it is turned on. If you now receive an FM-station

which airs a stereo broadcast in the course of its program, the corresponding indication appears on the

display.