Fleetwood WRS970 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Tastiera Fleetwood WRS970. Fleetwood WRS970 20. Reply system keypad and base station

Stampa la pagina

The base key when pressed will change the three

digits in the upper left corner of the LCD to display

the current Base ID (channel).

configured as Dynamic Addressed, the key will

prompt the user to search for bases units.

4.3 Alert Key

The Alert key sends a special packet to the base unit

to alert the presenter. It is not treated as a vote during

questions.

4.4 Symbol Key

The symbol key behaves differently depending on the

question type being asked. If multi-digit answers are

being entered, there is available a list of special

characters that are obtained by pressing the key again

within a small time period. When the timer runs out,

the next key press will appear in the next position.

4.5 Number Keys

The number keys are used for voting and changing

settings. Some question types will require these keys

to be used for voting. If the question type is alpha,

then the display will show the letter printed on the

button on the display.

4.6 Soft Keys

The soft keys are for special occasions.

question types require the use of these keys. They

are also used for menu navigation and Base selection.

If the keypad is

Some

Preliminary Document

4.7 Send Key

The send key has multiple functions depending upon

the question type being asked and the prompts on the

keypad display. This button is not always needed to

send a vote. Most question types will send when the

vote is entered. The send key is used for sending

multi-digit answer types after the numbers have been

entered. It is also used as an enter key or yes key

when prompted or saving data.

4.8 Delete Key

The delete key is used to clear the display, delete a

multi-digit character, and stop sending a key press. It

also functions as a cancel key for prompts and an exit

key for menu navigation.

4.9 LCD

The LCD presents the user with the keypad behavior.

There are several icons across the top of the screen

and a region for presenting and entering text.

4.10 Accessing the Menu

Each keypad has a menu system for local

configuration. These settings are not able to be set

globally from the base unit. To enter into the menu

list at the keypad, press the DEL key and the BASE

key simultaneously. The base (through software) can

also force each keypad on the system to display the

menu. The screen will change to the following:

Μ ε ν υ

< Σ ε ρ ι α λ # >

Pressing the soft key right and left button will cycle

through the pages. The center soft key button will

open the sub menu showing the current settings. The

DEL key will back out of the submenu entered. Each

of the pages are described below.

It is important to note that the base unit can limit the

menu access of each keypad on the system.

Therefore, the menu or some screens may not be

available.