Acqiris U1084A Manuale di avvio - Pagina 8
Sfoglia online o scarica il pdf Manuale di avvio per PCI Card Acqiris U1084A. Acqiris U1084A 20. Acquisition card, 8-bit, up to 4 gs/s and 1.5 ghz bandwidth
Introduction
Introduction
The scope of this Startup Guide is to detail the processes of receiving and installing the Acqiris
U1084A PCIe Acquisition Card, installing the required software, and verifying basic card
operation.
If you have any questions after reviewing this information, please contact technical support
Step 1: Unpack and Inspect the Card
Electrostatic Discharge (ESD) Precautions
Electrostatic discharge (ESD) can damage or destroy electronic components. Use a static-
safe work station to perform all work on electronic assemblies. A static-safe work station uses,
for instance, two types of ESD protection: conductive table-mat and wrist-strap combination,
and conductive floor-mat and heel-strap combination. Both types, when used together, provide
a significant level of ESD protection. Of the two, only the table-mat and wrist-strap combination
provides adequate ESD protection when used alone. To ensure user safety, the static-safe
accessories must provide at least 1 MΩ of isolation from ground.
Inspect for Damage
After unpacking a card, inspect it for any shipping damage. Report any damage to the shipping
agent immediately, as such damage is not covered by the warranty (see warranty information
attached to the original quote or order confirmation from Acqiris).
8
Closely follow the startup process flow in this document. Deviating from
the sequence can cause unpredictable system behavior, damage your
system, and may cause personal injury.
The card is shipped in materials which prevent damage from static. The
card should only be removed from the packaging in an anti-static area
ensuring that correct anti-static precautions are taken. Store all cards in
anti-static envelopes when not in use.
DO NOT use these techniques for a static-safe work station when
working on circuitry with a voltage potential greater than 500 volts.
Acqiris U1084A Startup Guide