DOD LS430W Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Telecamere da cruscotto DOD LS430W. DOD LS430W 19.
Anche per DOD LS430W: Manuale d'uso (20 pagine), Manuale di installazione dell'hardware (2 pagine)

INTRODUCTION OF OTHER FUNCTIONS

• Loop Recording (

)

default

Loop Recording can be set at 2/3/5 minutes, it means that the video clip intervals will

be set at 2/3/5 minutes long and after memory card is full, the oldest video clips will

be deleted and new video clips will take its place.

If Loop Recording is turned off, it will stop recording when the memory card is full.

• G-Sensor (default at Middle)

When the internal G-Sensor detects situations like an impact, intense bumps or hard

brakes during Recording Mode, the unit will automatically lock the current recording

to avoid being replaced by loop recording.

• Motion Detection

In Motion Detection Mode, the surrounding of where the car is parked will be

recorded taking the least amount of storage space. Recording will automatically be

turned off after 10 seconds if nothing happens during the monitor mode. Once there

is movement, the unit will start recording immediately.

* The Motion Detection Mode requires the camera to be connected to a constant

power supply.

When Motion Detection Mode is activated, Monitor Mode/Emergency Recording

Mode and the G-Sensor function will automatically be turned off.

• Plate Stamp

Enter your license plate number or desired input, and it will be displayed on the video

footage.

INTRODUCTION OF OTHER FUNCTIONS

• GPS Track (only available when connect with GPS signal)

Display the driving route with Google Maps.

• Standby Speed Display (only available when connect with GPS signal)

Current speed of the vehicle will be displayed on the screen once the GPS signal is

detected.

• GPS Speed Warning (only available when connect with GPS signal)

When the car speed exceeds a preset speed limit, the warning signal is shown to alert

the drivers to slow down the driving speed.

* GPS Speed Warning is only activated under the "Standby Speed Display" turns on.

• Password settings

It allows password owner to restrain drivers or others from operating settings,

modifying, or deleting the video and picture data files.

• Image Rotation

This feature will flip the screen 180 degrees allowing for other recording options.