DOD Acoustic One Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore DOD Acoustic One. DOD Acoustic One 18. Guitar preamp/fx processor

To select Programs using the footswitches:

BANK

Editing Programs

DATA

Acoustic One owner's manual

signal processing

1) After you power up, the Acoustic One defaults to Program

mode. Select a Bank by pressing the Bank selector footswitch.

The display shows the selected bank number on the left side of

the display and a dash on the right. The display looks some-

thing like this:

2) Press footswitch 1, 2, or 3. The dash in the display changes to

show the number of the Program you selected. The display

looks something like this:

NOTE: If a new Program number is not selected within 5 seconds

after pressing the Bank select button, the display returns to its pre-

vious setting.

As you become more familiar with the Acoustic One, you may want to

modify certain Programs to better suit your needs. Fortunately, the

Acoustic One is flexible enough to give you everything you need with-

out being difficult to program.

The following procedure is an example of how to modify your

Programs. Suppose that Program 32 (which has a Tremolo effect),

sounds close to what you want, but you want a faster Tremolo speed.

Here's how to change it:

1) Use the Data wheel, or the Bank and Program selector

footswitches to select Program 32.

2) Press the Tremolo effect group button. The Tremolo group

Status LED begins flashing and the display reads:

3) Look at the front panel Tremolo groupings to locate the effect

you want. In this case, you'll see that Tremolo Fast, can be

found between 19 and 21 in the Tremolo Group.

4) Use the Data wheel to scroll until the the display reads: