akpo WK-7 Manuale - Pagina 10

Sfoglia online o scarica il pdf Manuale per Cappa di ventilazione akpo WK-7. akpo WK-7 19.

2.2 ELECTRICAL CONNECTION

Before connecting the hood to electricity, make sure that the voltage and frequency of

the power supply correspond to the data indicated on the instrument panel. The hood

must be connected to an easily accessible outlet. Removing the plug and connecting the

hood directly to electricity is unacceptable. The hood should be connected to electricity

after installation as indicated.

3. INSTALLATION

For a gas stove, the distance "A" between the lowest part of the hood and the cooking

surface must be at least 65 cm (Fig. 16).

During assembly work, the applicable provisions regarding air exhaust must be

observed.

ATTENTION:

If the manual of the gas or electric cooker orders a different, larger distance from

the hood than 65 cm, then it should be used.

3.1 INSTALLATION OF EXHAUST HOUSING LIGHT, P3050/60

• Disassemble the aluminum grease filter (Fig. 17),

• Prepare the cabinet with the appropriate dimensions depending on the type of eaves

LIGHT GLASS / LIGHT / LIGHT ECO / LIGHT ECO R/ LIGHT ECO GLASS /

LIGHT PLUS (Fig. 18), P3050 (Fig. 22), P3060 (Fig. 23),

•

Put the hood into the previously prepared cabinet (Fig. 19),

Fig.