Clinton Electronics CE-CC110 Manuale - Pagina 11
Sfoglia online o scarica il pdf Manuale per Telecamera a colori Clinton Electronics CE-CC110. Clinton Electronics CE-CC110 19.
Stampa la pagina■ Camera Operation
Select the desired menu
LENS
item by using the UP and
SHUTTER
DOWN buttons.
WHITE BAL.
BLC
AGC
ADJUST
FUNCTION
EXIT
3. Press the LEFT or RIGHT button to change the Menu selection.
ㆍWhen the LEFT or RIGHT button is pressed, available values and modes
are displayed in order. Keep pressing the button until you get to the
mode you wish to select.
4. Select 'EXIT' and then press the SET button to exit the set up Menu.
Note
appears at the mode selected, it means that there is a sub-menu
ㆍIf
which can be selected by pressing the SET button.
LENS (selection)
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, position the cursor to point
to 'LENS' by using the UP and DOWN buttons.
2. Select the type of the lens setting to use by pressing the LEFT or RIGHT button.
SETUP
LENS
SHUTTER
WHITE BAL.
BLC
18
High Resolution Color Camera
SETUP
Modes can be changed
DC
using the LEFT and
FIXED
RIGHT buttons.
ATW
OFF
ON
DC
FIXED
ATW
OFF
● DC/VIDEO : Auto Iris Lens selection
Note
When using an auto iris lens, the setting of the auto iris lens selection
switch, located on the back of the camera, must be on DC or VIDEO
depending on the type of the lens which being used.
(Refer to the picture on page 13)
ㆍThe brightness of the screen can be adjusted in DC mode. The
brightness can be adjusted within the range of 0 ~255. The optimum
level of brightness can be achieved using this adjustment.
LENS DC
BRIGHTNESS
: RETURN
● MANUAL : Manual Lens selection
3. Press the SET button to return to the previous menu.
093
19
High Resolution Color Camera