Dodge 8W-97 Informazioni sul servizio - Pagina 8

Sfoglia online o scarica il pdf Informazioni sul servizio per Ricambi per auto Dodge 8W-97. Dodge 8W-97 8. Power distribution

8W - 97 - 8

INSTALLATION

1. Connect electrical harness connectors to Power

Distribution Center (PDC).

2. Position PDC and engage into the retaining tabs.

3. Connect the battery negative cable.

POWER OUTLET

REMOVAL

1. Disconnect and isolate the battery negative cable.

2. Pull the cigar lighter knob and element out of the cigar lighter receptacle base, or unsnap the protective cap from

the power outlet receptacle base.

3. Look inside the cigar lighter or power outlet receptacle base and note the position of the rectangular retaining

bosses of the mount that secures the receptacle base to the panel.

4. Insert a pair of external snap ring pliers into the cigar lighter or power outlet receptacle base and engage the tips

of the pliers with the retaining bosses of the mount.

5. Squeeze the pliers to disengage the mount retaining bosses from the receptacle base and, using a gentle rock-

ing motion, pull the pliers and the receptacle base out of the mount.

6. Pull the receptacle base away from the instrument panel far enough to access the instrument panel wire harness

connector.

7. Disconnect the instrument panel wire harness connector from the cigar lighter or power outlet receptacle base

connector receptacle.

8. Remove the cigar lighter or power outlet mount from the instrument panel.

INSTALLATION

1. Connect the instrument panel wire harness connector to the cigar lighter or power outlet receptacle base con-

nector receptacle.

2. Install the cigar lighter or power outlet mount into the instrument panel.

3. Align the splines on the outside of the cigar lighter or power outlet receptacle base connector receptacle with the

grooves on the inside of the mount.

4. Press firmly on the cigar lighter or power outlet receptacle base until the retaining bosses of the mount are fully

engaged in their receptacles.

5. Install the cigar lighter knob and element into the cigar lighter receptacle base, or the protective cap into the

power outlet receptacle base.

6. Connect the battery negative cable.

8W-97 POWER DISTRIBUTION - SERVICE INFORMATION