Clipcomm HCM-100 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Cuffie Clipcomm HCM-100. Clipcomm HCM-100 13. Bluetooth mono headset

Stampa la pagina

LED indication

Function
Power on
Power off
Paring
The headset and mobile
phone is connected and
the user is talking on the
headset
Unintentional link loss
(Until
the
lost
link
recovered)
Charging
Charging completed

Troubleshooting

This chapter details problems that may occur when using the headset and possible solutions. If you
find the same symptom after trial of the counter plans, inquire to the seller.
Malfunction
Can not turn on the
HCM-100
Unable
to
communicate
with
the HCM-100
Unable to pair the
HCM-100 with the
Bluetooth device.
Too
low
or
loud
speaker sound
Precautions
Do not drop the unit from high places
Beep
The HCM-100 beeps
once
The HCM-100 beeps
once
The HCM-100 beeps
twice
The HCM-100 beeps
once
The HCM-100 beeps
is
once
No beep
No beep
Checking point
Make sure the battery of HCM-
100 is fully charged
Make sure the mobile phone
supports the Headset or
Handsfree Profiles.
Make sure the battery of HCM-
100 is fully charged
Make sure the HCM-100 is on.
Make sure the HCM-100 is in
paring mode.
Check the speaker volume.
Status of LED
The blue LED light flickers 5 times quickly.
The blue LED light flickers 5 times quickly
The red and blue LED light flicker in turn
continuously.
The blue LED light flickers twice every 5
seconds.
The purple (blue and red) LED light flickers
once in every 5 seconds.
The red LED is lit
The red LED is turned off.
Counter plan
Charge the battery
The mobile phone should support
Headset or Handsfree Profiles to use
the HCM-100.
Charge the battery if it is low.
Press the multifunction for 2 seconds to
turn on the headset.
With power off, press and hold the
multifunction button for at least 5
seconds for the HCM-100 to be in
paring mode.
Press the VOLUME UP button [▲] and
the VOLUME DOWN button [▼] for
volume control.
9