Etac Molift Smart 150 Manuale d'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale d'uso per Sistemi di sollevamento Etac Molift Smart 150. Etac Molift Smart 150 20.
Anche per Etac Molift Smart 150: Manuale d'uso (19 pagine)
Stampa la pagina
Molift Smart 150 - use
The Molift Smart 150 hand control has two but-
tons (up and down). In addition there is a diode
which gives a light if the battery needs charging.
Battery
indicator
The legs are adjusted with pedals on the chassis.
Push handle
Lifting column
Battery
Battery holder /
control electronics
Emergency stop
BACK
Chassis with
lifting column
fixing bracket
BM09201 Molift SMART 150 English - Rev E 10/2012
1. Check that the lifter has no apparent damage
or other faults.
2. Check that there are no loose parts, and ensure
that the lifting column is properly fixed and
Up
that the locking handle is properly tightened.
3. Check that the legs
are moving in working
position only, mean-
ing that the legs do
Down
not move inside work-
ing position with the
column mounted (see
fig A).
4. Check that the suspen-
sion is released from
Battery
the transport hook.
Battery indicator
5. Check that the emer-
gency stop button is
not activated and that the lifter is functioning.
Electrical emer-
6. Check that you have sufficiently charged bat-
gency lowering
teries (that the battery diode on hand control
or chassis does not light).
Emergency stop
7. Check that the service lamp gives a green light.
If yellow or red light, send lifter to service.
8. If there are any faults or irregularities, the lift-
er should be taken out of service immediately
and marked "out of order". Contact your service
partner or local Molift representative.
Checklist before use
Fig A
Lifting arm
Suspension
Lifting motor
Adjustable legs
FRONT (forwards direc-
tion of travel)
Page 7 of 20