Clipsal 560884 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Commutatore a matrice Clipsal 560884. Clipsal 560884 20. Multi room audio matrix switcher

Multi Room Audio Matrix Switcher

7.0

Broadcast Audio

The Matrix Switcher includes two broadcast inputs; 1 × high priority

(labelled HI) and 1 × low priority (labelled LO). These allow a mono input

such as a door bell, telephone extender or alarm to be broadcast

throughout the Multi Room Audio system.

Audio connected to the low priority input is broadcast at the currently set

volume, to all amplifiers which are switched on and have Source Input 1, 2,

3 or 4 selected.

Audio connected to the high priority input is broadcast to all amplifiers at

a volume set by the installer (using the MARPA configuration software).

Any Amplifiers which are in standby mode are switched on. All Amplifiers

that are not switched off temporarily change to Source Input 4 to ensure

the audio is broadcast as widely as possible. Five seconds after the

broadcast audio ceases, Amplifiers return to standby (if applicable) and to

their previously set volume.

These actions may vary depending on how the installer has configured the

Matrix Switcher.

Audio connected to a high priority broadcast input must be of

sufficient volume to trigger a broadcast.

NOTES

A high priority (HI) broadcast uses left channel speakers. A low

priority (LO) broadcast uses right channel speakers.