DOF Reality M2 Istruzioni per la configurazione
Sfoglia online o scarica il pdf Istruzioni per la configurazione per Accessori per videogiochi DOF Reality M2. DOF Reality M2 15.
Anche per DOF Reality M2: Istruzioni per la configurazione (14 pagine)
Stampa la pagina
WARNING! Assembled platform will have exposed motors moving parts. Never operate it with small
children around or use optional protection cover.
Please check and if needed put back the plugs for the power to the motors and sensors they
must match the colors or numbers. This is very important. Never change wiring. Mixed of colors in
connectors can damage the motors and platform controllers. If you think that you need to reverse one
or more motors, do it in SRS software.
If your control box doesn't have colored motors plugs
then:
The right Motor is the brown plug and Motor 1,
The left Motor is the black plug and Motor 2
Do not put ANY controllers on the platform before it is completely tested and proven to be
working as desired. Once assembly is complete, attach the seat ONLY, i.e. no other items what-so-ever.
When you have ensured proper behavior only then start to add controllers one by one, but completing
movement tests with a person seated in the pilot seat after the addition of each controller to platform
weight.
For majority of frames you need to slide the mover inside, not on top of it. Motors always
should be facing back. As an example here is the PlaySeat EVO frame view.
from the back:
If you are not sure what bolts to use, here are links to a 1:1 scale template for Letter and A4 sized paper,
ensure you print without extra borders or spacing:
For US Letter Paper :
https://dofreality.com/hardware_template_Letter.pdf
For A4 Paper :
https://dofreality.com/hardware_templateA4.pdf
Never ever leave platform powered unattended and or when not in use. The motors are
constantly performing micro adjustments. If they overheat (above 70C) they may lose power.
1
Setup Instructions DOF Reality M2
And from the front: