Dog trace d-control 1500 mini Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Prodotto per la cura degli animali domestici Dog trace d-control 1500 mini. Dog trace d-control 1500 mini 19. Electronic training collar
Anche per Dog trace d-control 1500 mini: Manuale d'uso (20 pagine)

Stampa la pagina

Transmitter - button functions

The Dogtrace d–control transmitters are designed to operate with two separate receivers (dog 1 and

dog 2). The selected level of stimulations can be different for each receiver

Button

- Tone signal

The receiver emits a beeping noise when a „Tone button" is pressed. If the button is not released after

30 seconds, the tone will automatically turn off. While pressing, an indicator of the radio transmission

will appear on the LCD display of the transmitter; the indicator light on the receiver goes from flashing

green to permanent green for as long as the button is pressed.

Pressing the

„Stimulation button" activates a special type of stimulation in the receiver consisting

of safe stimulating impulses transmitted by two contact points installed in the receiver. You can choose

between momentary (nick N) and continuous (C) stimulation (if the button is not released after 4

seconds, the stimulation will automatically turn off as a safety feature). It is possible to adjust the

intensity of the stimulation very easily by the Up/Down control buttons. The receiver will be ready to be

reactivated once the button has been released. While pressing, an indicator of the radio transmission

will appear on the LCD display of the transmitter; the indicator light on the receiver goes from flashing

green to permanent red for as long as the button is pressed. You can select a momentary stimulation

(option N) or a continuous stimulation (option C) by pressing

the selection button

repeatedly; if the second receiver is used, press repeatedly the selection

button

to select momentary or continuos stimulation.